PUMP GP-F INJ 0R9919 - Caterpillar

Table 3
Parts List for 326-7378 Quick Coupler Frame Gp    
Item Number    Qty    Part Number
Part Name    
(1)     1     6C-5575 Cable    
(2)     1     331-8790 Adapter As    
(3)     1     331-8809 Identifier Gp    
(4)     1     331-8810 Mechanical Lock Gp    
(5)     1     337-3513 Plate Tool As    
(6)     1     2K-3374 Washer    
(7)     1     3T-7183 Pin    
(8)     2     9R-5301 Cotter Pin    
Illustration 4 g01895353
(E) Adapter fusion/ SA. 2006 938H, Designed for 938H, 950H, 962H sized machines but remains capable of fitting on the 924H to the 972H fusion couplers and linkage
Illustration 5 g01899496
(F) Safety locks
Illustration 6 g01900893
(G) SW engaged (H) SW disengaged
Check adapter (storage) – open wedge - lock engaged.
Pick adapter from GND (wedge position open) with lifting device.
Approach and insert the adapter into the SW bucket (ground level).
Place the key spanner.
Release the lower locks.
Release the upper lock.
Turn the key (Counter clockwise) until wedge close position.
Close & secure the upper lock.
Close & secure the lower locks.
Remove the key.
Pick adapteur on the bucket with fusion coupler fusion (OMM, SEBU7617) and secure the adapter onto the coupler.
For information pertaining to connecting to the adapter, refer to Operation and Maintenance Manual, SEBU7617.Installation Procedure of 326-7379 Quick Coupler Frame Gp
Note: By using a brush, grease the pins once per week to allow easy removal and to avoid rust.
Table 4
Parts List for 326-7379 Quick Coupler Frame Gp    
Item Number    Qty    Part Number
Part Name    
(1)     1     6C-5575 Cable    
(2)     1     331-8749 Adapter As    
(3)     1     331-8766 Mechanical Lock Gp    
(4)     1     331-8779 Identifier Gp    
(5)     1     337-3513 Plate Tool As    
(6)     1     2K-3374 Washer    
(7)     1     3T-7183 Pin    
(8)     2     9R-5301 Cotter Pin    
Illustration 7 g01941353
(J) Adapter fusion/ SA. 2007-8 950H, 962H, 966H, and 972H fusion couplers and linkage
Illustration 8 g01941493
(K) Safety locks
Check adapter (storage) – open wedge - lock engaged.
Pick adapter from GND (wedge position open) with lifting device.
Approach and insert the adapter into the SW bucket (ground level).
Place the key spanner.
Release the lower locks.
Release the upper lock.
Turn the key (Counter clockwise) until wedge close position.
Close & secure the upper lock.
Close & secure the lower locks.
Remove the key.
Pick adapteur on the bucket with fusion coupler fusion (OMM, SEBU7617) and secure the adapter onto the coupler.
For information pertaining to connecting to the adapter, refer to Operation and Maintenance Manual, SEBU7617.