PUMP GP-F INJ 0R9920 - Caterpillar

Remote controlled machines operate in this area. Personal injury or death could result from entry into the operation area. To prevent possible injury, perform the procedure that follows before testing and adjusting the system.
Using autonomous control, move the machine to the designated parking area.
Lower the work tool to the ground.
Stop the engine.
Determine the location and status of any machine in the operations area.
Gain entry authorization from Site Control before entering the operations area.
Depress the Barrier Control Panel (BCP) shutdown switch on the BCP. The Area Isolation System (AIS) strobe light will stop flashing.
Move the BCP isolation switch to the OFF position. Attach a "Do Not Operate" warning tag or a similar warning tag to the personal lockout on the BCP isolation switch.
Move the power supply panel isolation switch to the OFF position. Attach a "Do Not Operate" warning tag or a similar warning tag to the personal lockout on the BCP isolation switch.
Open the personnel barrier gate (if equipped).
Disconnect the lanyard and hang on the wall for storage. Switch the machine to manual operation.
Confirm with Site Control that the operations area has been deactivated.
If the red autonomous control warning light on the machine is flashing the machine may start and move without warning and may result in personal injury or death. Stay clear of the machine and exit the machine operations area immediately.
Approach the machine with caution. Only the amber Machine Automation System (MAS) enable warning light will be flashing.
Move the autonomous control enable switch to the OFF position.
Access the machine operator station and move the autonomous control switch to the OFF position. Move the remote control switch to the OFF position (if equipped). The machine is now in manual mode.
Notify Site Control personnel and confirm the status of the MAS, and the AIS.
In order to prepare the machine for troubleshooting, refer to Troubleshooting, Testing, and Adjusting, "Machine Preparation for Troubleshooting" in this manual.