PUMP GP-ENGINE OIL 1069873 - Caterpillar

THE SYSTEM MUST BE ANCHORED TO THE FOUNDATION PRIOR TO REMOVING THE BEARING RETAINERS. REMOVING THE BEARING RETAINERS PRIOR TO ANCHORING THE SYSTEM WILL RESULT IN DAMAGE TO THE UNIT.
Before the system is placed in operation, the shipping retainers must be removed and the operating retainers must be installed. Store the retainers in a safe place for later use.When the system is moved, the shipping retainers must be installed. These retainers protect the bearing cartridges.Removal of the Shipping Retainers
Only trained Caterpillar Dealer personnel should perform this procedure.
Illustration 1 g00927656
Exploded View of the Shipping Retainers (3) Two Bolts For The Upper Retainer (4) Upper Shipping Retainer (3) O-Ring (7) Lower Shipping Retainer (8) Two Bolts for the Lower Retainer
Remove three sheet metal panels. The panels are located inside the system.
Loosen and remove two bolts (3) on the upper retainer (4). A quarter turn of rotation on each bolt should be used until the bolts are loose.
By hand, pull out the retainer slowly.Note: Do not use any tools in order to remove the retainer. This will damage the bearing cartridge.
Store the retainer in a safe place for later use.
Loosen and remove three bolts (8) on the lower retainer (7). A quarter turn of rotation on each bolt should be used until the bolts are loose.
Slowly pull out the retainer.Note: Do not use any tools in order to remove the retainer. This will damage the bearing cartridge.
Store the retainer in a safe place for later use.
Proceed to Operation and Maintenance Manual, SEBU7464, "Maintenance Interval Section", "Bearing - Replace" in order to install the appropriate bearing retainer for your system.Installation of the Shipping Retainers
Only trained Caterpillar Dealer personnel should perform this procedure.
Refer to Operation and Maintenance Manual, SEBU7464, "Maintenance Interval Section", "Bearing - Replace" in order to remove the bearing retainer before proceeding with this procedure.
Illustration 2 g00927656
Exploded View of the Shipping Retainers (3) Two Bolts For The Upper Retainer (4) Upper Shipping Retainer (3) O-Ring (7) Lower Shipping Retainer (8) Two Bolts for the Lower Retainer
Remove three sheet metal panels. The panels are inside of the cabinet.
Locate the lower retainer that was stored.
By hand, slowly install the retainer.Note: Do not use any tools in order to install the retainer. This will damage the bearing cartridge.
Install three bolts (8) on the lower retainer (7). A quarter turn of rotation on each bolt should be used until the bolts are tightened.
Locate the upper retainer that was stored.
Install the two bolts (3) on the upper retainer (4). A quarter turn of rotation on each bolt should be used until the bolts are tightened.Note: Do not use any tools in order to install the retainer. This will damage the bearing cartridge.