PUMP GP-GR 1 BSC 10R4485 - Caterpillar

Illustration 1 g02200773
View of the left side of a C9.3 Industrial Engine
The serial number plate is located on the left side of the cylinder block. The engine control module will obstruct the view of the serial number plate.
Illustration 2 g00764267
Serial number plate
The following information is stamped on the serial number plate: engine serial number, engine model and arrangement number.
Illustration 3 g02201394
View of the top of a C9.3 Industrial Engine
The engine information plate is located toward the rear of the valve cover. The engine information plate may be read from the right side of the engine.
Illustration 4 g01347963
Engine information plate
The following information is on the information plate: engine serial number, engine model, engine arrangement number, maximum altitude of the engine that is necessary to achieve the rated power, horsepower, high idle, full load rpm, fuel settings and other information
Illustration 5 g02236893
View of the exhaust system of a C9.3 Industrial Engine
The Clean Emission Module (CEM) identification plate is located on the electronics plate for the CEM.
Illustration 6 g02236574
CEM plate
The Clean Emission Module (CEM) identification plate contains the following information: part number, serial number, change level and configuration ID code. This information may be needed by the Cat dealer when inquiries are being made on the CEM.
Illustration 7 g03354103
DEF module
(3) plate location The DEF module identification plate (3) contains the following information: part number, serial number and change level. This information may be needed by the Cat dealer when inquiries are being made on the DEF.
Illustration 8 g03354108
DEF plate