PUMP GP-GR A 10R7976 - Caterpillar

When Required
Engine Air Intake System - Clean/Replace elements Fuses and Circuit Breakers - Replace/reset Cutting Edges and End Bits - Replace if worn or damaged Ripper Tips - Replace if worn or damaged Radiator - Clean/Replace pressure cap, clean core Windshield Wipers and Washer - Inspect/Replace/Fill Filter Inspection - Inspect Batteries - Inspect Fuel System - Service when loss of power Brakes - Adjust when necessary. Adjustment intervals will decrease after the initial wear-in period of 250 service hoursEvery 10 Service Hours or Daily
Walk-Around Inspection - Inspect machine Seat Belt - Inspect for wear or damage Windows - Clean Engine Crankcase - Check oil level Transmission System - Check oil level Hydraulic System - Check oil level Radiator - Check coolant level Fuel Tank - Drain water and sediment Water Separator - Drain water and sediment Indicators and Gauges - Test Brakes - Test Back-up Alarm - Test Tracks - Inspect Dozer Hinge Pins - LubricateEvery 50 Service Hours or Weekly*
Track Pins - Inspect Ripper Linkage and Cylinder Bearings -Lubricate Bevel Gear Compartment - Check oil level Cab Air System - Clean filtersEvery 250 Service Hours or Monthly*
Engine Oil and Filter - Change. If the sulfur content in the fuel is greater than 1.5% by weight, use an oil with a TBN of 30 and reduce the oil change interval by one half Cooling System - Add coolant additive/replace element Final Drives - Check oil level Steering Brake/Clutch - Check oil level Air Conditioner (If Equipped) - Test/Adjust Fan and Alternator Belt - Inspect/Adjust/Replace Batteries - Inspect Engine Valve Clearance Setting - Check/Adjust on new or reconditioned engines, then at normal interval thereafter Tracks - AdjustEvery 500 Service Hours or 3 Months*
Transmission System - Replace filter Hydraulic System - Replace filter Fuel System - Wash primary/Replace secondary filters Fuel Tank - Clean screen/Replace filter Universal Joints - Lubricate Power Take-Off (If Equipped) - Lubricate Power Take-Off Bearing (If Equipped) - LubricateEvery 1000 Service Hours or 6 Months*
Transmission System - Change oil Final Drives - Change oil Rollover Protective Structure/Falling Object Protective Structure (ROPS/FOPS) - Inspect Hydraulic System - Change oil Bevel Gear Compartment - Change oil and clean breather Steering Brake/Clutch - Change oil Engine - Valve clearance settingEvery 3000 Service Hours or 2 Years*
Cooling System - Change coolant, clean system.*First Perform Previous Service Hours Items