PUMP GP-GR B 10R7982 - Caterpillar

To avoid possible weakening of this ROPS, consult a Caterpillar dealer before altering this ROPS in any way.
Lower or block equipment and stop engine before servicing.
The protection offered by this ROPS will be impared if it has been structurally damaged or has been involved in an overturn incident.
Lower all equipment and set parking brake before leaving machine. Stay safe distance from edge of cliff or overhang.General
Clean steps, grab irons and operator's compartment.Wear a hard hat, safety glasses and respirator as required by job conditions.Do not wear loose clothing or jewelry that could catch on controls.Report needed repairs.Make sure clearance flags, lights and other required warnings are on machine when roading.Know hand signals and who gives them.Do not smoke while fueling machine or when near batteries.Preparing to Operate
Clear all personnel from machine and surrounding area.Clear obstacles from path of machine, note hazards such as wires and ditches.Make certain all safety guards and covers are secured in place.Adjust seat and fasten seat belt before operating.Move all controls to HOLD before starting engine.Move transmission to NEUTRAL and have brake lock engaged before starting engine.Start engine in a well ventilated area.Testing Controls
Test all controls for proper operation.Test right and left steering while moving slowly.Test brakes.Test function of safety devices such as lights and backup alarm.Mounting and Dismounting
To park machine, lower blade to ground and apply down pressure, engage parking brake.Stop engine before leaving the machine.Do not jump off machine. Use steps and grab irons.Operating
Do not allow riders on the machine.The operator must satisfy himself that no one will be endangered before, and while, backing the machine.Observe all gauges frequently - investigate improper readings.Know traffic pattern of the job and obey flagmen, road signs and signals.Match speed with job conditions - do not coast.Know stopping distance of your machine at any given speed. Regulate travel speed accordingly.Carry blade close to ground.Stop machine frequently at night, walk around and inspect machine - stay alert.Road machine in forward direction, not reverse.Stay clear of overhangs, electric wires, slide or other dangerous areas.Use caution in crossing side hills, ridges, ditches, and other obstructions.Use caution when working on hills, banks or slopes, to avoid tipping.Stay a safe distance from edge of cliff or overhang.Listen for unusual noises.Report needed repairs noted during operation.Shipping
For shipping instructions consult your Caterpillar dealer.