PUMP GP-HYD 10R8689 - Caterpillar

10R8689 PUMP GP-HYD Caterpillar parts

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA10R8689
10R-8689
10R8689

Weight: 110 pounds 49 kg.

Buy PUMP GP-HYD 10R8689 Caterpillar genuine, new aftermarket tractor parts with delivery

Related part:

2213667 PUMP GP-HYD 10R8689 R

Compare Prices:

As an associate, we earn commssions on qualifying purchases through the links below

OCTOT 10R-8689 10R8689 Piston pump Fits for Caterpillar CAT D4G D5G Tractor

$7,888.00

03 Jan 2025

CN: JC-Construction

OCTOT 10R-8689 10R8689 Piston pump Fits for Caterpillar CAT D4G D5G Tractor
OCTOT Product Name: 10R-8689 10R8689 Piston pump || Part number: 10R-8689 10R8689 || Fits for Caterpillar CAT D4G D5G Tractor || 1 PCS Piston pump || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm you can leave us a message and provide your engine serial number and nameplate

For full view, you need register

Information:

Spade Drill Blade And Hole Diameter Required
Parts And Torque Required
Procedure For Drilling Segment Bolt Holes
(1) Remove bolt-on adapters (if equipped).(2) Working from the top of the base edge, scribe a line the length of the bucket through the center of front adapter bolt holes (1).(3) Place an appropriate segment on the base edge so that it is centered between any two sets of center adapter bolt holes. The line scribed earlier should be visible through the segment bolt holes. (Contact your Parts Department for appropriate segment part number.)(4) Mark the center of each segment hole (X) on the scribed line. Repeat this procedure for each center segment location.(5) Position an end segment (2) so that one bolt hole is directly over a front end bit hole (3). With these holes aligned, move the segment until the scribed line is visible through bolt hole (4). Mark the center of hole (4) on the scribed line.(6) Repeat this procedure for the other end of the bucket.(7) With a titanium-nitride-coated spade drill blade, drill the twelve holes marked with an (X).(8) Install the segments with bolts and nuts specified, and tighten the nuts to the torque given.