PUMP GP-PISTON 1125381 - Caterpillar

Illustration 1 g01013992
Typical ET screen
Highlight the "Security System Bypass Start Time" for the day that you want to setup. Press the "Change" push button at the bottom of the page. This will bring up the "Change Parameter Value" screen.
Enter the desired "start time" in the space that is provided. Then click on the "OK" button. All times are based on a 24 hour clock. If you want the desired start time to be 6:00 am then you must enter 06:00. If you want the desired start time to be 6:00 pm then you must enter 18:00. You must include the colon in the time setting or the MSS will not accept your entry.
Highlight the "Security System Bypass Stop Time" for the same day. Press the "Change" push button at the bottom of the page. This will bring up the "Change Parameter Value" screen. Enter the desired "stop time" in the space that is provided and click on the "OK" button.
Repeat Steps 3 and 5 for all days which should have Bypass Activation Times.
To have the MSS armed 24 hours a day, repeat Steps 3 and 5 entering 00:00 as the "Start time" and 00:00 as the "Stop time". Note: All times are based on a 24 hour clock. Refer to Testing and Adjusting, "Time - Set" for instructions on setting the date and the time of the MSS.