PUMP GP-PISTON 1140631 - Caterpillar

TARGET="_parent">Windows - Clean
Work Tool Guard and Reflector - Inspect/Replace
Every 10 Service Hours or Daily
Air Cleaner Dust Valve - Clean/Inspect
Axle Bearings - Lubricate
Axle Bearings - Lubricate
Backup Alarm - Test
Bogie and Idler - Inspect/Replace
Cooling System Level - Check
Engine Compartment - Inspect/Clean
Engine Oil Level - Check
Equipment Lowering Control Valve - Check
Fuel System Primary Filter (Water Separator) - Drain
Hydraulic System Oil Level - Check
Lift Arm and Cylinder Linkage - Lubricate
Quick Coupler - Clean/Inspect
Seat Belt - Inspect
Sprocket - Inspect
Sprocket Retaining Nuts - Check
Tilt Cylinder Bearings and Bucket Linkage Bearings - Lubricate
Tire Inflation - Check
Track (Rubber) - Inspect/Adjust
Track - Inspect/Adjust
Track Roller and Idler - Inspect/Replace
Wheel Nuts - Tighten
Work Tool - Lubricate
Work Tool Mounting Bracket - Inspect
Initial 250 Service Hours
Final Drive Oil - Change
Every 250 Service Hours
Final Drive Oil Level - Check
Engine Oil Sample - Obtain
Every 250 Service Hours or Monthly
Belts - Inspect/Adjust/Replace
Belts - Inspect/Adjust/Replace
Every 500 Service Hours
Cooling System Coolant Sample (Level 1) - Obtain
Final Drive Oil - Change
Hydraulic System Oil Sample - Obtain
Every 500 Service Hours or 3 Months
Drive Chain Case Oil - Check
Drive Chain Tension - Check/Adjust
Every 500 Service Hours or 6 Months
Fuel System Filter (In-Line) - Replace
Fuel System Primary Filter (Water Separator) Element - Replace
Hydraulic System Oil Filter - Replace
Every 500 Service Hours or 1 Year
Engine Oil and Filter - Change
Engine Oil and Filter - Change
Every 1000 Service Hours
Engine Valve Lash - Check
Every 1000 Service Hours or 6 Months
Drive Chain Case Oil - Change
Engine Crankcase Breather - Clean
Rollover Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) - Inspect
Every 1000 Service Hours or 1 Year
Sprocket Sleeve - Inspect
Every 2000 Service Hours
Refrigerant Dryer - Replace
Every 2000 Service Hours or 1 Year
Fuel Injection Timing - Check
Hydraulic System Oil - Change
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 3000 Service Hours or 2 Years
Cooling System Water Temperature Regulator - Replace
Every 3 Years
Seat Belt - Replace
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change