PUMP GP-FUEL PRIMING 1165438 - Caterpillar

2. Remove the cap and diaphragm from brake reservoir (1).
Do not allow brake fluid to contact painted surfaces because brake fluid will damage the paint.
3. Place a container below the connection of tube (2) at the master cylinder. Loosen the fitting at the master cylinder, and allow the brake fluid to drain from the reservoir.4. Remove tube (2), and replace the cap and diaphragm to prevent the introduction of dirt and foreign material.5. Remove the bolts that hold brake reservoir (1), and remove it.6. Remove the other brake reservoir in the same manner.7. Install the brake reservoirs in the reverse order of removal.8. Fill the brake reservoirs with brake fluid to the correct level.9. Remove (bleed) the air from the brake system. See Remove Air From The Wheel Brake Hydraulic Circuit (Bleed The Brakes) in Air System And Brakes Testing And Adjusting.END BY:a. separation of steering frame lock link