PUMP GP-PISTON & VANE 1197698 - Caterpillar

Illustration 1 g03397636
Hydraulic Schematic for Machines that use Command Control Steering (1) Steering pilot valve (2) Steering wheel (3) Steering quad check valve (4) Left neutralizer valve (5) Manifold (orifice and screen) (6) Orifice (7) Screen (8) Left turn stop (9) Steering crossover relief valve (10) Left steering cylinder (11) Right steering cylinder (12) Steering control valve (13) Shuttle valve (14) Hydraulic line from the hydraulic implement pilot circuit (15) Hydraulic line from the hydraulic implement pump (16) Steering pump (17) Hydraulic oil tank (18) Right neutralizer valve (19) Right turn stop (20) Directional spool (21) Pressure reducing valve (22) Signal line (23) Backup relief valve (24) Pump group (25) Breather (AA) Pressure tap for checking pilot pressure for left turns at the steering control valve (BB) Pressure tap for checking neutral pilot pressure at the pilot control valve (CC) Pressure tap for checking pilot supply pressure for the steering pilot valve (DD) Pressure tap for checking steering pump pressure (EE) Pressure tap for checking pilot pressure for right turns at the steering control valve (FF) Pressure tap for checking signal pressureThis machine uses Command Control steering. With this type of steering system, the turning speed of the machine does not depend on the turning speed of the steering wheel. Instead, the turning speed of the machine depends on the rotational position of the steering wheel in relation to the non-engine end frame.The pilot control valve is located on the non-engine end frame. The steering wheel is located on the engine end frame. The NEUTRAL position of the steering wheel is directly related to the angle of the front frame. Whenever the machine is in the STRAIGHT AHEAD position the NEUTRAL position for the steering wheel is also straight ahead. Whenever the front frame of the machine is pointed left, the NEUTRAL position for the steering wheel will also point to the left. Whenever the front frame of the machine is pointed to the right, the NEUTRAL position for the steering wheel is also pointed to the right. Turn the steering wheel to the right or to the left and hold the steering wheel in that position. The machine will articulate until the angle of the non-engine end frame and the angle of the steering wheel are identical. As the angle of the non-engine end frame nears the held position (NEUTRAL position) of the steering wheel, the speed of articulation will slow down. The machine will then stop articulating when the NEUTRAL position is reached. The steering wheel will remain in the NEUTRAL position and the machine will remain at the current angle of the articulation.
Illustration 2 g03400297
Right Side View (1) Steering pilot valve (3) Steering quad check valve (5) Manifold (11) Right steering cylinder (12) Steering control valve (17) Hydraulic oil tank (18) Right neutralizer valve (24) Pump