PUMP GP-MAIN HYDRAULIC 1232231 - Caterpillar

The starter will be automatically disengaged after 45 seconds of cranking. Allow 2 minutes for starting motor to cool before cranking again.Turbocharger damage can result, if the engine rpm is not kept low until the engine oil light/guage verifies the oil pressure is sufficient.Ether is automatic DO NOT manually inject
The start will be automatically disengage after 45 seconds of cranking. Allow the starter to cool for 2 minutes before cranking again. Turbocharger damage can result if the engine rpm is not kept low until the oil gauge display verifies that the oil pressure is sufficient.
Note: Manually check engine oil prior to starting engine. Ensure that oil is in the safe range of the dipstick. For more information, refer to Operation and Maintenance Manual, "Engine Oil Level - Check".
All forward/neutral/reverse switches must be in the NEUTRAL position to start the machine. If either switch is not in NEUTRAL position, the machine will not start.
Engage the parking brake.
Fasten the seat belt.
Ensure that the control levers are in the HOLD position.
Before the engine is started, check for the presence of bystanders or maintenance personnel. Ensure that all personnel are clear of the machine. Briefly sound the horn before you start the engine.
Turn the engine start switch to the START position to start the engine.Note: Do not depress the accelerator pedal during engine starting.Note: If the starting aid indicator on the indication display illuminates during cranking, the engine is activating the ether system. Premeasured amounts of ether will automatically be injected. DO NOT attempt to manually inject ether.
Release the engine start switch key after the engine starts.Note: If the ether system has been activated for starting, the starting aid indicator may remain illuminated after the engine has started. The system automatically will continue to inject ether as needed until the engine speed has stabilized. DO NOT attempt to manually inject ether.Note: For temperatures below −18° C (−0° F), the use of a coolant heater is recommended.Note: For temperatures below −23° C (−10° F), consult your Cat dealer for additional information or refer to Special Publication, SEBU5898, "Cold Weather Recommendations".