PUMP GP-HYDRAULIC 1242582 - Caterpillar

Motor displacement ... 75 cm3/rev (4.75 in3/rev)Motor displacement minimum ... 38 cm3/rev (2.40 in3/rev)Forward/reverse charge relief valve (circuit flushing) at high idle ... 2000 69 kPa (290 10 psi)Type of motor: Parallel-axial piston/slipper, variable displacement. Rotation can be clockwise or counterclockwise.(1) Tighten plug to a torque of ... 37 N m (27 lb ft)(2) Tighten relief valve to a torque of: a. adjustable screw and lock nut ... 52 N m (38 lb ft)b. plug ... 95 N m (70 lb ft)(3) Tighten the maximum displacement limiter to a torque of (not shown) ... 54 N m (40 lb ft)(4) Tighten plug, to a torque of ... 20 N m (14 lb ft)(5) Tighten plug, to a torque of ... 37 N m (27 lb ft)(6) Tighten plug, to a torque of ... 37 N m (27 lb ft)(7) Tighten plug, to a torque of ... 20 N m (14 lb ft)(8) Bolts, tighten the following to a torque of a. four shorter socket head cap screws ... 70 N m (51 lb ft)b. four longer socket head cap screws ... 60 N m (44 lb ft)(9) Tighten four bolts to a torque of: standard grade ... 13.6 N m (10 lb ft)grade 12.9 ... 16.3 N m (12 lb ft)(10) Tighten plug to a torque of ... 41 N m (30 lb ft)(11) Electrohydraulic 2-position displacement control, two position 4-way valve: Tighten nut to torque of ... 6.8 N m (5 lb ft) (do not over torque)(12) Tighten plug to a torque of: six larger bolts ... 90 N m (66 lb ft)one smaller bolt ... 30 N m (22 lb ft)(13) Tighten plug to a torque of ... 41 N m (30 lb ft)(14) Minimum displacement limiter ... 68 N m (50 lb ft)(15) Tighten plug to a torque of (not shown) ... 54 N m (40 lbft)(16) Tighten plug to a torque of ... 34 N m (25 lb ft)