PUMP GP-VANE 1265350 - Caterpillar

a. remove hoodb. remove air conditioning condenserc. remove air conditioning dryer
At operating temperature, the engine coolant is hot and under pressure. Steam can cause personal injury. Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand. Remove the fill cap slowly to release the relieve pressure. Cooling system conditioner contains alkali. Avoid contact with skin and eyes to prevent personal injury.
1. Drain the coolant from the radiator into a suitable container.2. Loosen hose clamps (1) and disconnect upper radiator hose. It is not necessary to remove the upper radiator hose, however it may be desirable.3. Remove upper radiator bolt (3). This bolt will have to be reinstalled after the radiator has been removed to secure the radiator support and shroud and prevent possible damage to the fan. 4. Loosen hose clamp (4).5. Remove hose (5) from valve (6).6. Remove valve (6) from the radiator.7. Attach tooling (A) to the top of the radiator at this time. Attach a hoist to tooling (A).8. Remove lower radiator bolt (7). 9. Remove upper radiator hose (8).10. Remove upper radiator bolt (3). This bolt will have to be reinstalled after the radiator has been removed to secure the radiator support and shroud and prevent possible damage to the fan.11. Loosen hose clamp (10) and remove hose (11) form the bottom of the radiator. 12. Remove radiator (12) from the engine compartment. Weight of the radiator is 40.8 kg (90 lb). Install the radiator in the exact reverse order. See the Operation And Maintenance Manual for the exact quantity and type of coolant if the drained coolant is not to be reused.End By:a. install air conditioning dryerb. install air conditioning condenserc. install hood