1267116 PUMP AS Caterpillar parts
375, 5080
Rating:
Alternative (cross code) number:
CA1267116
126-7116
1267116
CA1267116
126-7116
1267116
Weight: 10 pounds 4 kg.
EXCAVATOR, FRONT SHOVEL,
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 235-0518 Valve Spring Compression Group 1 Start By:
Remove the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The following procedure is for the removal of the inlet valve springs and the exhaust valve springs without removing the cylinder head. This procedure can be performed on only one cylinder at a time. This will prevent the inlet valves and the exhaust valves from falling into the cylinder.
Rotate the crankshaft in order to bring the piston to the top center position in the cylinder.
Illustration 1 g01136330
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install Tooling (A) on the cylinder head.
Remove retainer locks (1).
Remove Tooling (A).
Remove valve rotators (2).
Remove valve springs (3) and valve springs (4) from each valve.
Remove bases (5) from the cylinder head. Note: Install the valve springs before you rotate the crankshaft.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 235-0518 Valve Spring Compression Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01136330
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install bases (5) for the valve springs.
Install valve springs (4) and valve springs (3).
Install valve rotators (2).
Install Tooling (A).
Install retainer locks (1).
Remove Tooling (A). End By:
Install the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 235-0518 Valve Spring Compression Group 1 Start By:
Remove the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: The following procedure is for the removal of the inlet valve springs and the exhaust valve springs without removing the cylinder head. This procedure can be performed on only one cylinder at a time. This will prevent the inlet valves and the exhaust valves from falling into the cylinder.
Rotate the crankshaft in order to bring the piston to the top center position in the cylinder.
Illustration 1 g01136330
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install Tooling (A) on the cylinder head.
Remove retainer locks (1).
Remove Tooling (A).
Remove valve rotators (2).
Remove valve springs (3) and valve springs (4) from each valve.
Remove bases (5) from the cylinder head. Note: Install the valve springs before you rotate the crankshaft.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 235-0518 Valve Spring Compression Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01136330
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install bases (5) for the valve springs.
Install valve springs (4) and valve springs (3).
Install valve rotators (2).
Install Tooling (A).
Install retainer locks (1).
Remove Tooling (A). End By:
Install the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Install".
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
16G, 16H NA, 245, 245B, 245D, 3406B, 3406C, 375, 375 L, 5080, 578, 583R, 587R, 621E, 621F, 623E, 623F, 627E, 627F, 814B, 824C, 824G, 825C, 825G, 826C, 826G, 980C, 980F, 980F II, 980G, D350E, D35HP, D4...
16G, 16H NA, 3406B, 3406C, 375, 5080, 578, 583R, 587R, 621F, 623E, 623F, 627B, 627F, 814B, 824G, 825G, 826C, 826G, 980C, 980F, 980G, D350E, D400E, D8N, D8R, D8R II, G3406, HT400, PM-465, RM-250C, RM-3...
3406B, 3406C, 3406E, 3408, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B, 583R, 587R, C-15, C-16, C15, C18, D8N, D8R, D...
16G, 16H NA, 245D, 3406B, 3406C, 3408B, 3408C, 3412, 3412C, 375, 375 L, 5080, 578, 583R, 587R, 621F, 623E, 623F, 627B, 627F, 814B, 824C, 824G, 825C, 825G, 826C, 826G, 980C, 980F, 980F II, 980G, D350E,...
16G, 245B, 245D, 3406B, 3408B, 3412, 375, 375 L, 578, 621E, 621F, 623E, 627E, 627F, 824C, 824G, 825C, 825G, 826C, 826G, 980C, 980F, 980G, D40D, D8N, D8R II, RR-250, SS-250
16G, 16H NA, 245B, 245D, 3406, 3406B, 3406C, 375, 375 L, 5080, 578, 621E, 621F, 623E, 627E, 627F, 814B, 824C, 824G, 825C, 825G, 826C, 826G, 980C, 980F, 980F II, 980G, D350E, D400E, D40D, D8N, D8R, G34...
16G, 16H NA, 245, 245B, 245D, 3126, 3406B, 3406C, 375, 375 L, 5080, 578, 583R, 587R, 621E, 621F, 623E, 623F, 627E, 627F, 814B, 824C, 824G, 825C, 825G, 826C, 826G, 980C, 980F, 980F II, 980G, D350E, D35...
16G, 16H NA, 245D, 3406, 3406B, 3406C, 375, 375 L, 5080, 578, 621E, 621F, 623E, 627F, 814B, 824C, 824G, 825C, 825G, 826C, 826G, 980C, 980F, 980F II, 980G, D350E, D400E, D40D, D8N, D8R, G3406, RR-250, ...
16G, 245B, 3406, 3406B, 375, 578, 621E, 623E, 627E, 814B, 824C, 825C, 826C, 980C, 980F, D40D, D8N, G3406, RR-250, SS-250
245, 245B, 245D, 3406, 375, 375 L, 5080, 578, 583R, 621B, 983B, D8N, D8R, D8R II
375, 375 L, 5080, 578, 583R, D8N, D8R, D8R II
120G, 12G, 12H, 12H ES, 12H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16G, 16H, 16H NA, 214B, 235, 3114, 3116, 3126, 3126B, 3126E, 3176, 3176B, 3176C, 3196,...
1026168
PUMP & MOTOR GP-FUEL TRANSFER
330, 330 L, 350, 375, 5080
330, 330 L, 350, 375, 5080
1232996
PUMP AS
5130, 5130B
5130, 5130B
3872354
PUMP-FUEL INJECTION
AP-300D
AP-300D
0826412
PUMP GP-STEERING
PS-500
PS-500
0814760
PUMP AS
PS-500
PS-500
330D L, 336D, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 568 FM LL
2573015
PUMP AS
320C FM, 320D, 320D FM, 320D FM RR, 324D FM, 324D FM LL, 325D FM, 325D FM LL, 330D FM, 568 FM LL
320C FM, 320D, 320D FM, 320D FM RR, 324D FM, 324D FM LL, 325D FM, 325D FM LL, 330D FM, 568 FM LL
2130946
PUMP-HYDRAULIC
AD30, AD45, AD55
AD30, AD45, AD55
1460821
PUMP & MOTOR GP
5130B, 5230B
5130B, 5230B
1233710
PUMP AS
5130B, 5230, 5230B
5130B, 5230, 5230B
1469282
PUMP GP-AUXILIARY ELECTRIC HYD
345B L, 375, 5080
345B L, 375, 5080