PUMP & MOUNTING GP 1446325 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 5188 - Start By:
Remove the bottom guard.
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Drain the engine oil. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct draining and filling procedures.
Illustration 1 g06070844Note: Identify the position and orientation of the dipstick assembly.
If necessary, remove the dipstick assembly. Loosen nut (3). Remove bolt (2) and dipstick assembly (1). Remove the seal from dipstick assembly (1).
Illustration 2 g06069191Note: Support the engine oil pan. Do not pry or gouge the sealing surface of the engine oil pan. Tap the engine oil pan with a rubber mallet to remove the engine oil pan.
Remove bolts (4) and engine oil pan (5).
Remove the gasket from engine oil pan (5).Installation Procedure
Install engine oil pan (5) in the reverse order of removal.
Illustration 3 g03409407
Tighten bolts (4) to a torque of 22 N m (195 lb in). Tighten bolts (4) in the sequence that is shown in Illustration 3.
Apply Tooling (A) to nut (3). Tighten nut (3) to a torque of 18 N m (159 lb in).