PUMP GP-GEAR 1447692 - Caterpillar

Illustration 1 g03643263
Table 1
Item Qty Part Specification Description
1 1 128-9260 Bushing Outside diameter is 100.133 0.033 mm (3.9422 0.0013 inch).
Thickness is 2.475 0.025 mm (0.0974 0.0010 inch).
2 1 170-9846 Buffer Seal Lubricate the seal lightly with lubricant that is being sealed.
3 1 216-0004 U-Cup Seal Lubricate the seal lightly with lubricant that is being sealed.
4 1 165-9288 Lip Type Seal Lubricate the seal lightly with lubricant that is being sealed.
5 - - Before assembly, apply green Loctite 609 to the wiper seal groove.
6 1 1V-8242 Bushing Bore is 89.185 0.020 mm (3.5112 0.0008 inch).
Installation depth is 10.5 0.3 mm (0.41 0.01 inch).
7 1 7Y-4622 Locknut Before assembly, lubricate the face and threads.
Torque to 5600 560 N m (4130 413 lb ft).
8 2 179-9771 Ring Lubricate inside diameter and out side diameter with clean grease.
9 1 495-8200 Seal Ring As Lubricate inside diameter and out side diameter with clean grease.
10 1 150-5884 Ring Lubricate inside diameter and out side diameter with clean grease.
A 1 382-7998 Tilt Cylinder As Bore is 130.00 0.08 mm (5.118 0.003 inch).
B 1 387-0057 Rod As Diameter is 94.930 0.038 mm (3.7374 0.0015 inch).
C 1 382-7983 Head Bore over two lands is 95.63 0.03 mm (3.765 0.001 inch).
11 8 7Y-5215 Bolt Torque to 900 100 N m (664 74 lb ft).
12 1 1V-8242 Bushing Bore is 89.185 0.020 mm (3.5112 0.0008 inch).
Installation depth is 9.85 0.50 mm (0.388 0.020 inch).