1466771 PUMP GP-AUXILIARY SEA WATER Caterpillar parts
G3406
Rating:
Alternative (cross code) number:
CA1466771
146-6771
1466771
CA1466771
146-6771
1466771
GAS ENGINE, GENERATOR SET,
Compatible equipment models: 1466771:
Number on catalog scheme:
For full view, you need register
Caterpillar SIS machinery equipment:
Information:
8T-8639 Low Pressure Switch (NORMALLY OPEN)
To test the switch:
1. Disconnect the switch from the machine harness.2. Connect the 146-4080 Multimeter to the two connector pins, and place the meter in the Ohms position.3. Measure the switch resistance.4. If the system is charged above 344 kPa 34 kPa, the meter will display less than 1 ohm.5. If the resistance displayed is "OL", and the system pressure is not below specification, replace the switch.6. Every time the switch fails, also test for arc suppressor functionality.7. If the switch is removed, ensure the new switch wires are securely cable-wrapped to prevent vibration damage. The meter can display "OL" if the switch contacts are dirty. The switch contacts can become dirty if the arc suppressor is no longer functioning. The meter will display "OL" if the switch is not threaded into the A/C system.3E-6462 High Pressure Switch (NORMALLY CLOSED)
To test the switch:
1. Disconnect the switch from the machine harness.2. Connect the 146-4080 Multimeter to the two connector pins, and place the meter in the Ohms position.3. Measure the switch resistance.4. If the system is charged below 2400 kPa 140 kPa, the meter will display less than 1 ohm.5. If the resistance displayed is "OL", and the system pressure is not above specification, replace the switch.6. Every time the switch fails, also test for arc suppressor functionality.7. If the switch is removed, ensure the new switch wires are securely cable-wrapped to prevent vibration damage. The meter can display "OL" if the switch contacts are dirty. The switch contacts can become dirty if the arc suppressor is no longer functioning. The meter will display less than 1 ohm if the switch is not threaded into the A/C system.7X-1076 High Pressure Switch (NORMALLY CLOSED)
To test the switch:
1. Disconnect the switch from the machine harness.2. Connect the 146-4080 Multimeter to the two connector pins, and place the meter in the Ohms position.3. Measure the switch resistance.4. If the system is charged below 2412 kPa 140 kPa, the meter will display less than 1 ohm.5. If the resistance displayed is "OL", and the system pressure is not above specification, replace the switch.6. Every time the switch fails, also test for arc suppressor functionality.7. If the switch is removed, ensure the new switch wires are securely cable-wrapped to prevent vibration damage. The meter can display "OL" if the switch contacts are dirty. The switch contacts can become dirty if the arc suppressor is no longer functioning. The meter will display less than 1 ohm if the switch is not threaded into the A/C system.Testing Arc Suppressors:
For Part Number 106-8704
1. Place multimeter in diode testing mode.2. Place red probe in red or plus terminal of multimeter.3. Place black probe in black or com terminal of multimeter.4. Place the red probe on Pin 2 of the connector, and
To test the switch:
1. Disconnect the switch from the machine harness.2. Connect the 146-4080 Multimeter to the two connector pins, and place the meter in the Ohms position.3. Measure the switch resistance.4. If the system is charged above 344 kPa 34 kPa, the meter will display less than 1 ohm.5. If the resistance displayed is "OL", and the system pressure is not below specification, replace the switch.6. Every time the switch fails, also test for arc suppressor functionality.7. If the switch is removed, ensure the new switch wires are securely cable-wrapped to prevent vibration damage. The meter can display "OL" if the switch contacts are dirty. The switch contacts can become dirty if the arc suppressor is no longer functioning. The meter will display "OL" if the switch is not threaded into the A/C system.3E-6462 High Pressure Switch (NORMALLY CLOSED)
To test the switch:
1. Disconnect the switch from the machine harness.2. Connect the 146-4080 Multimeter to the two connector pins, and place the meter in the Ohms position.3. Measure the switch resistance.4. If the system is charged below 2400 kPa 140 kPa, the meter will display less than 1 ohm.5. If the resistance displayed is "OL", and the system pressure is not above specification, replace the switch.6. Every time the switch fails, also test for arc suppressor functionality.7. If the switch is removed, ensure the new switch wires are securely cable-wrapped to prevent vibration damage. The meter can display "OL" if the switch contacts are dirty. The switch contacts can become dirty if the arc suppressor is no longer functioning. The meter will display less than 1 ohm if the switch is not threaded into the A/C system.7X-1076 High Pressure Switch (NORMALLY CLOSED)
To test the switch:
1. Disconnect the switch from the machine harness.2. Connect the 146-4080 Multimeter to the two connector pins, and place the meter in the Ohms position.3. Measure the switch resistance.4. If the system is charged below 2412 kPa 140 kPa, the meter will display less than 1 ohm.5. If the resistance displayed is "OL", and the system pressure is not above specification, replace the switch.6. Every time the switch fails, also test for arc suppressor functionality.7. If the switch is removed, ensure the new switch wires are securely cable-wrapped to prevent vibration damage. The meter can display "OL" if the switch contacts are dirty. The switch contacts can become dirty if the arc suppressor is no longer functioning. The meter will display less than 1 ohm if the switch is not threaded into the A/C system.Testing Arc Suppressors:
For Part Number 106-8704
1. Place multimeter in diode testing mode.2. Place red probe in red or plus terminal of multimeter.3. Place black probe in black or com terminal of multimeter.4. Place the red probe on Pin 2 of the connector, and
Parts pump Caterpillar catalog:
16G, 16H NA, 245, 245B, 245D, 3406, 3406B, 3406C, 375, 375 L, 5080, 578, 583R, 621, 621B, 621E, 621F, 623B, 623E, 623F, 627B, 627E, 627F, 814B, 824C, 824G, 825C, 825G, 826C, 826G, 980C, 980F, 980F II,...
16G, 16H NA, 3406, 3406B, 3406C, 375, 375 L, 5080, 578, 583R, 587R, 621E, 621F, 623E, 623F, 627F, 814B, 824G, 825G, 826C, 826G, 980C, 980F, 980G, D350E, D400E, D40D, D8N, D8R, D8R II, G3406, HT400, PM...
16G, 245B, 245D, 3406, 3406B, 375, 578, 621B, 621E, 623E, 627E, 814B, 824C, 825C, 826C, 980C, 980F, 980F II, D40D, D8N, D8R, G3406, RR-250, SS-250
16G, 16H NA, 3406B, 3406C, 375, 5080, 578, 583R, 587R, 621F, 623E, 623F, 627B, 627F, 814B, 824G, 825G, 826C, 826G, 980C, 980F, 980G, D350E, D400E, D8N, D8R, D8R II, G3406, HT400, PM-465, RM-250C, RM-3...
16G, 245, 245B, 3406, 3406B, 578, 621B, 621E, 623E, 627B, 627E, 814B, 824C, 825C, 826C, 980C, D40D, D8N, G3406, RR-250, SS-250
16G, 16H NA, 245B, 245D, 3406, 3406B, 3406C, 375, 375 L, 5080, 578, 621E, 621F, 623E, 627E, 627F, 814B, 824C, 824G, 825C, 825G, 826C, 826G, 980C, 980F, 980F II, 980G, D350E, D400E, D40D, D8N, D8R, G34...
16G, 16H NA, 3126, 3406, 3406B, 3406C, 3406E, 621, 621B, 621E, 621F, 623B, 623E, 623F, 627B, 627E, 627F, 814B, 824C, 824G, 825C, 825G, 826C, 826G, 980C, 980F, 980F II, 980G, D350E, D400, D400E, D40D, ...
16G, 16H NA, 245D, 3406, 3406B, 3406C, 375, 375 L, 5080, 578, 621E, 621F, 623E, 627F, 814B, 824C, 824G, 825C, 825G, 826C, 826G, 980C, 980F, 980F II, 980G, D350E, D400E, D40D, D8N, D8R, G3406, RR-250, ...
16G, 245B, 3406, 3406B, 375, 578, 621E, 623E, 627E, 814B, 824C, 825C, 826C, 980C, 980F, D40D, D8N, G3406, RR-250, SS-250
3406, 3406B, 3406C, G3406
7C8380
PUMP GP-AUXILIARY
3406B, G3406
3406B, G3406
9Y5809
PUMP GP-FUEL INJECTION
436, 438
436, 438