PUMP GP-GEAR 1493070 - Caterpillar

Removal Procedure
Illustration 1 g00618207
Remove three bolts (1) and guard plate (2) above the right fender.
Illustration 2 g00618208
Remove two bolts (3) and open door (4) .
Illustration 3 g00618209
Note: Mark all wires and hoses for correct assembly. Cap all hoses and cover all openings in order to prevent loss of fluids or contamination of the system.
Disconnect electrical connector (5) .
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Disconnect two hoses (7) .
Remove three bolts (6). Remove power train oil filter (8) .Installation Procedure
Install power train oil filter (8) in the reverse order of removal.