PUMP GP-GEAR 1530482 - Caterpillar

Illustration 1 g01248017
Note: See the Engine Information Plate for the correct timing specifications to use for the adjustment of the automatic timing advance unit. The Engine Information Plate will contain the performance specification number. The performance specification number can be referenced in the Technical Marketing Information. The performance specification number may also be referenced in the Fuel Setting and Related Information Fiche. (1) 1W-5427 Spring Test force ... 391 20 N (87.9 4.5 lb) Length under test force ... 62 mm (2.4 inch) Free length after test ... 81.96 mm (3.227 inch) Outside diameter ... 97 mm (3.8 inch) Color code ... no color code (2) Bolt Tighten the four bolts to the following torque. ... 12 4 N m (9 3 lb ft) (3) Plug Tighten the plug to the following torque. ... 70 15 N m (52 11 lb ft) (4) Nut Tighten the nut to the following torque. ... 4.5 0.5 N m (39.83 4.43 lb in) (5) Nut Tighten the nut to the following torque. ... 70 15 N m (52 11 lb ft) (6) 4P-4366 Spring Test force ... 11.1 0.6 N (2.50 .13 lb) Length under test force ... 39 mm (1.5 inch) Free length after test ... 49.3 mm (1.94 inch) Outside diameter ... 15.4 mm (.61 inch) Color code ... one red stripe and one light green stripe (7) BoltThere are four bolts that hold the flyweight carrier to the body. Apply 4C-9500 Quick Cure Primer to the bolt threads. Allow the primer dry. Put 9S-3263 Thread Lock Compound on the bolt threads before installation. Tighten the bolts to the following torque. ... 13 3 N m (9.6 2.2 lb ft) (8) Bolt Tighten the four bolts to the following torque. ... 55 7 N m (41 5 lb ft)