PUMP GP-GEAR 1572630 - Caterpillar

Illustration 1 g01478231
(1) Front axle (2) Final drives (3) Drum brake (Underneath cover) (4) DifferentialThe front axle is attached to the frame. The front axle includes the pinion gear (1), the final drives (2), the disc brake (3), and the differential (4).
Illustration 2 g01394588
Typical example (5) Planetary gears (6) Ring gear (7) Reaction hub (8) Sun gear (9) Splined coupler (10) Splined shaft (11) Side gears (12) Pinions (13) Bevel pinion (14) Bevel gear (15) CarrierPower from the drive shaft turns the bevel pinion (13) in the front axle. The power enters the axle through the bevel pinion. The bevel pinion turns the bevel gear (14) which is fastened to the differential case.Power is transferred through the differential by pinions (12) and side gears (11) to splined shaft (10). The shaft is joined by a splined coupler (9) to the sun gear (8) in the final drives. The main components of the final drives are the carrier (15), the planetary gear set (5), ring gear (6) and sun gear. Each final drive has the same components. The final drives cause the last speed reduction and the torque increase in the drive train.Three planetary gear sets (5) are mounted in the carrier (15) .As the sun gear (8) is driven by the differential, the planetary gears are forced to revolve around the inside ring of the gear. The movement of the planetary gears around the ring gear causes the planetary carrier and the wheel hub to rotate. This transfers power to the rim and the tire which bolts to the flange on the axle shaft.Differential Lock (if equipped)
Illustration 3 g01478224
The button for the differential lock (22) is located on the joystick. The button for the differential lock (22) will lock the front and rear differentials. Push the button and hold the button in order to activate the lock. Release the button in order to unlock the differentials. The differential lock will activate if the machine speed is less than 12 km/h (7.5 mph).