PUMP GP-PISTON 1599453 - Caterpillar

CAT ID
The Caterpillar Driver Information Display (CAT ID) is available to provide operating information to the driver about the engine. The Driver Trip Segment, Fleet Trip Segment, and Maintenance Indicator can be viewed. However, the Fleet Trip Segment Histograms and Custom Data cannot be viewed from the display.CAT ID provides the ability to enter a driver identification (ID) to divide the Fleet Trip Segment for two drivers. The Fleet Trip Segment can also be tagged by state, if the driver enters state crossings.In summary, the CAT ID can be used to tag portions of the Fleet Trip Segment into two driver ID's and into states as required. The driver ID and state by state information cannot be viewed from the display, only Caterpillar Fleet Information Software (FIS) can view this information. The ability to reset any of these parameters is dependent on Customer Parameters in the ECM.CAT ID will also display engine operating parameters such as engine rpm, coolant temperature, boost pressure, etc., as well as engine diagnostic codes with the PID-FMI and a brief text description.An available 1995 feature of CAT ID is Theft Deterrent. Theft Deterrent allows the driver to input a four character password to shut the engine down and/or prevent the engine from restarting until the four character password is successfully entered. Theft Deterrent requires a JAN95 or later Personality Module in the ECM. The CAT ID must also have the EEPROM chip capable of supporting this feature.Fleet Information Software (FIS)
Caterpillar Fleet Information Software (FIS) is another method to review the trip information. The entire Fleet Trip Segment, including Histograms, Custom Data, and information tagged by driver ID and by state can all be accessed. Maintenance Indicator information can also be accessed using the Caterpillar FIS.When Caterpillar FIS downloads the information it also resets the ECM to prepare it for the next trip. The information can be downloaded to a computer with the Caterpillar FIS program, or to an Argo Mobile Data Tool (MDT) which is then connected to a computer to download the information.Driver Incentive Feature
The Driver Incentive Feature automatically adjusts the VSL as a reward to the driver for operating a truck in a manner meeting the truck owner's specifications. The Driver Incentive Feature is available with FEB98 and later Personality Modules. Several parameters are monitored in order to evaluate a driver's operating habits. Weighting factors are applied to the parameters reflecting the desired and expected operating habits. If operating habits meet or exceed the owner's specifications, the VSL is automatically increased as a reward. The VSL will decrease when operating habits do not meet owner specifications.ECM Trip Data Transfer
ECM Trip Data Transfer parameter allows the ECM to interact through the SAE J1587 Data Link with certain communication systems. Programming this parameter requires Factory Passwords.With this system the customer can remotely change the following parameters using Cat FIS:* Fuel Correction Factor* Custom Data Parameters* Maintenance Indicator ParametersWith this system the customer can remotely extract the following information from the ECM:* Lifetime Totals*