PUMP ASSEM. 1637786 - Caterpillar

Installation of 358-4276 Grade Control Gp
The following table given below lists the parts that are required for installing 358-4276 Grade Control Gp .
Table 3
Item    Part Number    Description    
23     359-7135     Wiring Harness    
24     112-6646     Locknut    
25     328-0894     Joystick Control Gp    
26     3E-6754     Grommet    
27     130-5300     Clip    
28     8T-4121     Hard Washer    
29     8T-4137     Bolt    
Illustration 6 g03360283
Illustration 7 g03360299
Illustration 8 g03360318
Discard the existing joystick control group and install the new 328-0894 Joystick Control Gp (25). Refer to Illustration 6 and 7.
Install the 359-7135 Wiring Harness (23) at the back of the cab and the other components. Refer to Illustrations 6, 7, and 8.Installation of 343-3530 Display Mounting Gp
The following table given below lists the parts that are required for installing 343-3530 Display Mounting Gp .
Table 4
Item    Part Number    Description    
30     6C-9089     Cap Nut    
31     5C-2890     Nut    
32     121-9870     Screw    
33     343-3544     Bracket As    
34     343-3696     Adapter    
35     343-3565     Plate    
36     198-9706     Screw    
37     343-3591     Hinge As    
38     343-3546     Plate As    
39     9X-2042     Screw    
40     271-9408     Screw    
41     343-3593     Cover    
42     343-3594     Cover    
43     9X-2045     Screw    
44     5C-2890     Nut    
45     343-3559     Latch As    
Illustration 9 g03360327
Illustration 10 g03360328
Refer to the Illustrations 9 and 10, to install the components of the 343-3530 Display Mounting Gp .Note: Tighten the 9X-2042 Screw to a torque of 3.4 0.6 N m (30.1 5.3 lb in).Note: Apply sealant to threads of 198-9706 Screw , 271-9408 Screw , and 9X-2045 Screw prior to assembly.