1647936 PUMP GP-GEAR Caterpillar parts
928G, IT28G
Rating:
Alternative (cross code) number:
CA1647936
164-7936
1647936
CA1647936
164-7936
1647936
Weight: 21 pounds 9 kg.
INTEGRATED TOOLCARRIER, WHEEL LOADER,
This part in 8 request:
Show.
This information for suppliers only!
2023-01-16
2022-10-12
2022-10-12
2022-10-12
2021-07-29
2021-06-12
2020-08-18
2017-11-10
Number on catalog scheme:
3
For full view, you need register
Information:
Installation Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00830199
Remove fuel lines (2). Fuel shutoff valve (1) must be in the OFF position.
Illustration 2 g00830206
Attach a suitable lifting device to lifting eye assembly (3). The weight of the power pack is approximately 3085 (6800 lb). Position the power pack . All hose assemblies must clear the frame. All wire assemblies must clear the frame. The drive shaft must align with the transfer gears.
Illustration 3 g00830207
Install mounting bolts (5). Install clip (4).
Repeat Step 3 for each corner of the power pack.
Illustration 4 g00824308
Connect drive shaft (6) to the transfer gears. For the correct torque, refer to Specifications, "Drive Shaft" for the Power Train.
Illustration 5 g00830213
Connect four hose assemblies (8). Turn fuel shutoff valve (7) to the ON position.
Illustration 6 g00830199
Install fuel lines (2). Turn fuel shutoff valve (1) to the ON position.
Illustration 7 g00830218
Feed the wiring harness through tube (10). Connect plug (9).
Illustration 8 g00830223
Install cover (11).
Illustration 9 g00830228
Connect two plugs (12). Install clip (13).
Illustration 10 g00830234
Connect two plugs (16). Install wiring harness (15) to clip (14).
Illustration 11 g00830241
Connect three plugs (17).
Illustration 12 g00830243
Feed battery cables (18) into the battery box.
Install two brackets (20). Install cover (19).
Connect battery cables (18). For the correct torque, refer to Specifications, "Battery" for the Power Train.
Prime the fuel system. Refer to Operation and Maintenance Manual, "Fuel System - Prime" for the correct procedure.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00830199
Remove fuel lines (2). Fuel shutoff valve (1) must be in the OFF position.
Illustration 2 g00830206
Attach a suitable lifting device to lifting eye assembly (3). The weight of the power pack is approximately 3085 (6800 lb). Position the power pack . All hose assemblies must clear the frame. All wire assemblies must clear the frame. The drive shaft must align with the transfer gears.
Illustration 3 g00830207
Install mounting bolts (5). Install clip (4).
Repeat Step 3 for each corner of the power pack.
Illustration 4 g00824308
Connect drive shaft (6) to the transfer gears. For the correct torque, refer to Specifications, "Drive Shaft" for the Power Train.
Illustration 5 g00830213
Connect four hose assemblies (8). Turn fuel shutoff valve (7) to the ON position.
Illustration 6 g00830199
Install fuel lines (2). Turn fuel shutoff valve (1) to the ON position.
Illustration 7 g00830218
Feed the wiring harness through tube (10). Connect plug (9).
Illustration 8 g00830223
Install cover (11).
Illustration 9 g00830228
Connect two plugs (12). Install clip (13).
Illustration 10 g00830234
Connect two plugs (16). Install wiring harness (15) to clip (14).
Illustration 11 g00830241
Connect three plugs (17).
Illustration 12 g00830243
Feed battery cables (18) into the battery box.
Install two brackets (20). Install cover (19).
Connect battery cables (18). For the correct torque, refer to Specifications, "Battery" for the Power Train.
Prime the fuel system. Refer to Operation and Maintenance Manual, "Fuel System - Prime" for the correct procedure.
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
3126, 35, 55, 561M, 928G, 953C, 963B, 963C, CS-531D, CS-533D, CS-563C, CS-563D, CS-573C, CS-573D, CS-583C, CS-583D, D5M, D6M, IT28G, M318, M320
3126, 35, 55, 561M, 574, 928G, 938G, 950G, 953C, 962G, 963B, 963C, CS-531D, CS-533D, CS-563C, CS-563D, CS-573C, CS-573D, CS-583C, CS-583D, D5M, D6M, IT28G, IT38G, IT62G, M318, M320
120H, 120H ES, 120H NA, 135H, 135H NA, 3116, 3126, 3126B, 3126E, 322C, 322C FM, 325C, 35, 45, 525B, 533, 535B, 539, 55, 550, 570, 570B, 574, 580, 580B, 613C II, 928G, 950G, 953C, 962G, AP-1000B, AP-10...
120H, 120H ES, 120H NA, 135H, 135H NA, 3116, 3126, 3126B, 3126E, 322C, 322C FM, 325C, 35, 45, 525B, 533, 535B, 539, 55, 550, 570, 570B, 574, 580, 580B, 613C II, 928G, 950G, 953C, 962G, AP-1000B, AP-10...
3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 325B L, 35, 446B, 446D, 45, 525B, 535B, 539, 55, 550, 561M, 570, 580, 928G, 938F, 938G, 950G, 953C, 962G, 963B, 963C, AP-1000, AP-1000B, AP-1055B, AP-9...
205B, 206B, 211B, 212B, 213B, 214B, 224B, 3114, 3116, 3126B, 3126E, 320 L, 320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 35, 446, 446B, 446D, 45, 525B, 535B, 53...
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 30/30, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L,...
924G, 924GZ, 928G, IT28G
205B, 206B, 211B, 212B, 213B, 214B, 224B, 3114, 3116, 3126, 3126B, 3126E, 320 L, 320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 35, 446, 446B, 446D, 45, 525B, 53...
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3116, 3126, 320 L, 320B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 L, 325B, 325B L, 45, 55, 561M, 613C II, 928F, 928G, 938F, 938G, 950F, 950F...
928G, IT28G
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 30/30, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L,...
1310294
PUMP GP-GEAR
928G, IT28G
928G, IT28G
928G, IT28G
1238914
PUMP
120M, 12M, 14H, 14H NA, 16G, 16H, 16H NA, 16M, 24H, 5110B, 924G, 924GZ, 928G, 938G, AD30, AD40, AD45, AD45B, AD55, AD55B, AD60, AE40, IT28G, IT38G, R1300, R1300G, R1300G II, R1600, R1600G, R1700G, R29...
120M, 12M, 14H, 14H NA, 16G, 16H, 16H NA, 16M, 24H, 5110B, 924G, 924GZ, 928G, 938G, AD30, AD40, AD45, AD45B, AD55, AD55B, AD60, AE40, IT28G, IT38G, R1300, R1300G, R1300G II, R1600, R1600G, R1700G, R29...
1643308
PUMP GP-GEAR
928G, IT28G
928G, IT28G
914G, IT14G
914G, IT14G
2153013
PUMP GP-GEAR
938G, 938G II, 950H, 962H, 980G II, 980H, 986H, 990 II, IT38G, IT38G II, IT62H
938G, 938G II, 950H, 962H, 980G II, 980H, 986H, 990 II, IT38G, IT38G II, IT62H
1780205
PUMP-GEAR
950G, 962G, 966G, 972G, IT62G
950G, 962G, 966G, 972G, IT62G
1631651
PUMP-GEAR
950G, 962G, 966G, 972G, IT62G
950G, 962G, 966G, 972G, IT62G
2175178
PUMP GP-GEAR
950G, 950G II, 962G, 962G II, IT62G, IT62G II
950G, 950G II, 962G, 962G II, IT62G, IT62G II
1517168
PUMP GP-GEAR
950G, 962G, IT62G
950G, 962G, IT62G
2044995
PUMP GP-GEAR
928G, IT28G
928G, IT28G