PUMP GP-FUEL INJECTION 1671180 - Caterpillar

Setting the Language
There are two ways to select the language that appears on the display module:
The office selects the language file by sending a file activate of the specific language file from the office to the machine.
The operator selects the language file through the "Select Language File" dialog.Note: The on-board software receives tasks from other applications such as Task List Manager. These tasks can be sent in any language that is supported by the keyboard and operating system being used in the office. The on-board software receives these tasks in any language that the operating system supports.
Menu - Opens the main menuTo use the "Select Language File" dialog to set a new language on the display, complete these steps:
Illustration 25 g03747546
"Select Language File" dialog
From the main menu, select "System" > "Select" > "Select Language File".The "Select Language File" dialog appears.By default, the following languages are listed in the "Select Language File" dialog:
English (default)
French
Spanish
Swedish
Portuguese
Russian
Mongolian
Select the language that will be used on the display module.For example, to use the Spanish language, select "5.0 Spanish".
Select "OK".Note: When the operator shuts down the on-board software, the selected language file is saved.Reference: For information on advanced tasks, refer to Systems Operation, KEN8277, "Language Support". Advanced tasks include editing the "Set Language File" dialog, installing a new language in the MCU, and using resource files and language identifiers.Using the Machine Configuration Utility
The Machine Configuration Utility (MCU) is a tool that configures advanced machine settings. The software replaces the previous method of editing the machine configuration file (mach_cfg.txt) file by hand.Reference: For information on using the MCU, select "Start" > "All Programs" > "Cat MineStar System and Tools" > "Machine Configuration Utility".Reference: For information on adding the machine in Cat MineStar System, refer to Systems Operation, RENR9562, "Cat® Terrain User Guide".Performing the Dimension Measurements and Measure-up
Illustration 26 g03775198
Machine Dimensions - Side View
Illustration 27 g03775203
Machine Dimensions - Top View
Enter correct details for the machine receiver offsets and the machine dimensions. Any errors transfer directly into the finished as-built surface file. All measurements are in meters.
Reference: Refer to the side view in Illustration 26 and the top view in Illustration 27 as a reference guide to record the measurements.To set up the machine in the office, complete these steps:
On the machine, measure the machine receiver offsets.
The "X" measurement that is taken to the right of the centerline of the machine is a positive number.
The "X" measurement that is taken to the left of the centerline of the machine is a negative number.
The "Y" measurement that is taken in front of the front axle will be a positive number.
The "Y" measurement that is taken behind the front axle is a negative number.
Illustration 28 g03790280
Measuring for the phase center (5)
( 1) 353-2794 Receiver
(5) Phase center
GPS x - Measure the distance from the phase center (5) of