PUMP GP-GEAR 1769781 - Caterpillar

D9N, D10N, 621E, 621S, 776B Tractors;
578 Pipelayers;
973 Loaders;
627E Tractor-Scrapers;
And 777B TrucksReference: Service Magazine; June 23, 1986; Page 6; "Hydraulic And Coolant Flow Switches In Electronic Monitoring System (EMS) Can Be Damaged By Incorrect Testing" for machines equipped with EMS.Reference: Special Instruction, Form SEHS9227, "Installation of Switches/Sensors With Sure-Seal® Connectors". This article supersedes the article titled "New Coolant Flow Switch Group Has Improved Design To Provide Extended Service Life" on Page 10 of the May 28, 1990 Service Magazine.
Description of Change: Two new coolant flow switches are used on machines equipped with EMS. The new switches have an improved shaft and two additional paddle rivets. These improvements provide longer life in some applications. The new switches are identical except for paddle lengths.Adaptable To: The new 9X3040 Flow Switch Group has a 50 mm (2.0") paddle and replaces the former 6N5284, 6T9315, 8C4794, and 9W2343 Flow Switch Assemblies. The new 9X7088 Flow Switch Group has a 65 mm (2.6") paddle and replaces the former 6N6960, 6T9316, and 8C4795 Flow Switch Assemblies. Applications using the 6N5284 and 6N6960 Flow Switch Assemblies, require a Sure-Seal® connector on the machine harness. This can be accomplished by using the 6V3000 Seal Repair Kit and Special Instruction SEHS9227.