PUMP GP-FUEL PRM & PRIM FILTER 1886121 - Caterpillar

Configuration Behaviors
Each RTD input has the configuration parameters that are shown in Table 5.
Table 5
Configuration Parameters for Each Input
Description Range Default Value
Input #n – Suspect Parameter Number (SPN) Any SPN that is listed in Table 4 0
Input #n - RTD Temperature Coefficient Configuration IEC Platinum (0.00385)
JIS Platinum (0.003916)
US Platinum (0.003902)
Legacy US Platinum (0.003920)
SAMA Platinum (0.003923) IEC
Input #n – RTD Sensor Type Not Installed
2-wire RTD
3-wire RTD
4-wire RTD Not Installed
Input #n – High Temperature Shutdown Threshold 0 °C (32 °F) to 1735 °C (3155 °F) 95 °C (203 °F)
Input #n – High Temperature Warning Threshold 0 °C (32 °F) to 1735 °C (3155 °F) 85 °C (185 °F)
Input #n – Low Temperature Warning Threshold −200 °C (−328 °F) to 800 °C (1472 °F) −200 °C (−328 °F)
Input #n – High Temperature Shutdown Delay Time 0 to 120 seconds 1
Input #n – High Temperature Warning Delay Time 0 to 120 seconds 1
Input #n - Low Temperature Warning Delay Time 0 to 120 seconds 1