PUMP GP-FUEL INJECTION 1929789 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1P-2420     Repair Stand     1    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the condition of all seals and of all components. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00326043
Position valve assembly (1) in the transmission.
Install bolts (2). Tighten to a torque of 45 4 N m (33 3 lb ft).
Install tube (3) .
Install cover (4) and the bolts.
Install O-ring seals (5). Put clean oil on seals.
Illustration 2 g00326045
Install pressure control valve (6) .
Install bolts (7). Tighten to a torque of 45 4 N m (33 3 lb ft).
Illustration 3 g00326046
Install the gasket into cover (8).
Install cover (8) with bolts (9) and washers.End By: Install the transmission and transfer gears. Refer to Disassembly and Assembly, "Transmission and Transfer Gears - Install".