PUMP GP-AUXILIARY SEA WATER 1942450 - Caterpillar

Illustration 1 g00436201
The fuse box is located on the left side of the seat for the operator. The fuse box is located on the floor. Remove the 4 screws (18) which hold the cover on the fuse box in order to expose the fuses.Note: The front head lights, the instrument lights, the dome light, and the red lights on the rear of the scraper are on an automatic breaker. The automatic breaker is located inside the compartment for the fuses.Note: Your machine may not utilize all of the fuses that are listed here.
Fuses - The fuses protect the electrical system from damage that is caused by overloaded circuits. If the element inside the fuse separates, replace the fuse. Check the circuit if the element is separated in the new fuse. Repair the circuit, if necessary. Note: All of the fuses in this fuse box are 10 ampere fuses. You should only replace these fuses with 10 ampere fuses of the same type.
Illustration 2 g00436360
The fuses are numbered left to right. The fuses are numbered from the top to the bottom. A pictograph (17) is located to the right of the fuse holder. The location of the fuse matches the location of the pictograph.
EMS (1) - 10 AMP
Front Wiper/Washer (2) - 10 AMP
Air Dryer (3) - 10 AMP
Radio (4) - 10 AMP
Engine Start (5) - 10 AMP
Turn Signals (6) - 10 AMP
Rear Wiper/Washer (7) - 10 AMP
Rear Lights (8) - 10 AMP
Solenoids (9) - 10 AMP
Electronic Transmission Controls (10) - 10 AMP
Optional Front Flood Lights (11) - 10 AMP
Optional Electric Fuel Pump (12) - 10 AMP
Horn (13) - 10 AMP
Backup Alarm (14) - 10 AMP
Engine Solenoid (15) - 10 AMP
Cushion-Hitch and/or Bail Control (16) - 10 AMP