PUMP-COOLANT 1972035 - Caterpillar

Table 1
APPROXIMATE REFILL CAPACITIES    
Compartment or System    Liters    US gal    Imperial gallon    
Cooling System     (70)     (18.5)     (15.4)    
Fuel Tank     (424)     (112)     (93.3)    
Engine Crankcase and Filter     (28.0)     (7.4)     (6.2)    
Power Train Oil System     (148)     (39.1)     (32.6)    
Hydraulic Tank Oil     (55.5)     (14.7)     (12.2)    
Each Final Drive     (13.5)     (3.6)     (3)    
Each Recoil Spring Compartment     (25)     (6.6)     (5.5)    
Pivot Shaft     (5)     (1.3)     (1.1)    
Winch     (63)     (16.5)     (13.7)    
Winch (Low PTO)     (43.5)     (11.5)     (9.6)    Note: When you are operating on severe slopes, the quantity of oil in the power train can be increased up to 10 percent. When you are operating with the increased oil quantity, prolonged operation in some machines can cause high power train oil temperatures. After the work on the severe slopes has been completed, drain the excessive oil quantity from the bevel gear case.Ecology Drains
Table 2
Ecology Drain Components    
Drain Location     Component Needed    
Transmission    
12.7 mm (0.5 inch)
pipe with 1/2-14 NPTH thread    
Torque Converter    
12.7 mm (0.5 inch)
pipe with 1/2-14 NPTH thread    
Engine Oil    
19 mm (0.75 inch) pipe with 3/4-14 NPTH thread    
Hydraulic Tank     126-7914 Oil Drain Coupling
or
25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread    
Bevel Gear Case    
33 mm (1.31 inch) pipe with 1 5/16-12 NPTH thread