PUMP GP-MAIN HYDRAULIC 2003366 - Caterpillar

Press the right key or press the left key in order to highlight the "SERVICE" menu. Press the OK key. Note: You will be prompted to enter a password. Refer to "Password Entry" for information on entering a password.
Table 56
"SERVICE"
"MAINTENANCE"
"PASSWORD CHANGE"
After the password has been entered successfully, press the up key or the down key in order to highlight the "MAINTENANCE" menu. Press the OK key.
Table 57
"MAINTENANCE"
"FLTR/FLUID INFO"
Press the up key or the down key in order to highlight the "FLTR/FLUID INFO" menu. Press the OK key.
Table 58
"FLTR/FLUID INFO"
"ENGINE OIL FILTER"
"00000 / 00000 [HR]"
"HYD OIL RET FILTER"
"00000 / 00000 [HR]"
"PILOT OIL FILTER"
"00000 / 00000 [HR]"
A list of filters and fluids will be displayed. For each item, the current hours of use will be displayed on the left. The recommended change interval will be displayed on the right. Press the up key or the down key in order to highlight the desired filter or fluid. Press the OK key.
Press the left key in order to reset the accumulated hours for the selected item.
Press the OK key in order to save the new hours in memory. Note: Press the back key in order to return to the previous display without saving the value.Note: Press the home key in order to return to the default display.Economy Mode Select
Table 59
"SETTING"
"DISPLAY SETUP"
"WORK TOOL SELECT"
" ECONO MODE SELECT"
"POWER MODE SELECT"
"VIDEO MODE SETTING"
From the "SETTING" menu, press the up key or press the down key in order to highlight the "ECONOMY MODE SELECT" menu. Then press the "OK" key.Press the up key or the down key in order to highlight "ECONO MODE ON" or highlight "ECONO MODE OFF". Press the "OK" key in order to confirm the desired selection. When "ECONO MODE ON" is selected, the symbol for economy mode will appear at the top of the screen on the monitor.Note: If "STD HYD POWER" is selected from the "MAIN MENU/SETTING/POWER MODE SELECT" menu, then the standard power mode symbol will appear at the top of the screen on the monitor and "ECONO MODE SELECT" will not be available. Note: If "ECONOMY MODE FIX" is selected from the "MAIN MENU/SETTING/DISPLAY SETUP/INDICATED ITEM" menu, then "ECONO MODE SELECT" will not be available.Note: When the "ECONOMY MODE ON" is selected a work tool cannot be used. Once a work tool is enabled economy mode is temporarily disabled and the "ECONOMY MODE" symbol will not appear on the monitor display. When the "BUCKET NO TOOL" option is selected again, the "ECONOMY MODE" will appear. Economy mode will automatically resume.Power Mode Select
Table 60
"SETTING"
"DISPLAY SETUP"
"WORK TOOL SELECT"
"ECONO MODE SELECT"
"POWER MODE SELECT"
"VIDEO MODE SETTING"
From the "SETTING" menu, press the up key or press the down key in order to highlight the "POWER MODE SELECT" menu. Then press the "OK" key .Press the up key or the down key in order to highlight "STD HYD POWER" or highlight "HIGH HYD POWER". Press the "OK" key in order to confirm the desired selection.Note: When "STD HYD POWER" is selected, the symbol for standard