2003376 PUMP GP-MAIN HYDRAULIC Caterpillar parts
320C
Rating:
Alternative (cross code) number:
CA2003376
200-3376
2003376
CA2003376
200-3376
2003376
EXCAVATOR,
You can buy:
US$8,150.00
28 May 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Hydraulic Main Pump Suitable for Caterpillar CAT 320C 320CL Excavator 200-3376 2003376 SBS120
TuneCrumph Item Name:Hydraulic Main Pump || Item Number:200-3376 2003376 SBS120 || Application:for Caterpillar CAT 320C 320CL Excavator || Attention: Dear buyers, precise matching of auto parts is the prerequisite for safe installation! To avoid the problems such as returns, exchanges or installation hazards caused by incorrect model selection, please carefully read and verify the model before placing your order. Thank you for your support! || NOTE:We are fully aware that your satisfaction is the driving force for the growth of our brand. Thank you for giving us the opportunity to serve you. If there is anything we haven't covered, please give us your feedback directly. Your suggestions are extremely precious to us!
TuneCrumph Item Name:Hydraulic Main Pump || Item Number:200-3376 2003376 SBS120 || Application:for Caterpillar CAT 320C 320CL Excavator || Attention: Dear buyers, precise matching of auto parts is the prerequisite for safe installation! To avoid the problems such as returns, exchanges or installation hazards caused by incorrect model selection, please carefully read and verify the model before placing your order. Thank you for your support! || NOTE:We are fully aware that your satisfaction is the driving force for the growth of our brand. Thank you for giving us the opportunity to serve you. If there is anything we haven't covered, please give us your feedback directly. Your suggestions are extremely precious to us!
Hydraulic Main Pump Suitable for Caterpillar CAT 320C 320CL Excavator 200-3376 2003376 SBS120
OfkZynodor Item Name:Hydraulic Main Pump || Item Number:200-3376 2003376 SBS120 || Application:for Caterpillar CAT 320C 320CL Excavator || Please make sure to carefully compare the photos and check the part numbers before making the purchase. If you are unable to confirm your engine model or part number, please leave us a message and we will assist you in confirming that the product you purchase is the one you need. || Your order is not merely a single purchase but the beginning of a cooperative journey, aiming to ensure the safe and smooth operation of your vehicle. We are proud to offer you reliable precision engineering components and unparalleled services.
OfkZynodor Item Name:Hydraulic Main Pump || Item Number:200-3376 2003376 SBS120 || Application:for Caterpillar CAT 320C 320CL Excavator || Please make sure to carefully compare the photos and check the part numbers before making the purchase. If you are unable to confirm your engine model or part number, please leave us a message and we will assist you in confirming that the product you purchase is the one you need. || Your order is not merely a single purchase but the beginning of a cooperative journey, aiming to ensure the safe and smooth operation of your vehicle. We are proud to offer you reliable precision engineering components and unparalleled services.
200-3376 2003376 SBS120 Hydraulic Main Pump Fit for Caterpillar for CAT 320C 320CL Excavator
tranculty ????Part Name:Hydraulic Main Pump || ????Part Number:200-3376 2003376 SBS120 || ????Application:Fit for Caterpillar for CAT 320C 320CL Excavator || ????Need more parts? Contact us now! As a dedicated sales team, we offer an extensive range of products to meet your needs. Trusted by countless satisfied buyers, we guarantee top-notch quality and exceptional service. Shop with confidence—your perfect shopping experience awaits! || ????If you're unsure about product compatibility with your machine model, please provide your engine nameplate/serial number and part number for a swift suitability check. To avoid delays and unnecessary returns, double-check the product image and part number before ordering. Thank you for your cooperation!
tranculty ????Part Name:Hydraulic Main Pump || ????Part Number:200-3376 2003376 SBS120 || ????Application:Fit for Caterpillar for CAT 320C 320CL Excavator || ????Need more parts? Contact us now! As a dedicated sales team, we offer an extensive range of products to meet your needs. Trusted by countless satisfied buyers, we guarantee top-notch quality and exceptional service. Shop with confidence—your perfect shopping experience awaits! || ????If you're unsure about product compatibility with your machine model, please provide your engine nameplate/serial number and part number for a swift suitability check. To avoid delays and unnecessary returns, double-check the product image and part number before ordering. Thank you for your cooperation!
Number on catalog scheme:
For full view, you need register
Compatible equipment models: 2003376:
Information:
Forest Machine
Illustration 1 g01090849Wipe all fittings before you apply lubricant.
Illustration 2 g00685797
Apply lubricant through the fitting at the base of each boom cylinder.
Illustration 3 g00102079
(1) Fitting. (2) Fitting.
Apply lubricant through fittings (1) and (2) at the base of the boom.
Illustration 4 g00102081
(3) Fitting. (4) Fitting.
Apply lubricant through fitting (3) on the rod end of each boom cylinder. Apply lubricant through fitting (4) on the head end of each stick cylinder. Note: To ensure proper lubrication of the lower boom bearings and of the boom cylinder rod end bearings, lubricant should be applied through fittings (1), (2), (3) and (4). Apply lubricant first when the boom is raised and any work tool is suspended. Then apply lubricant when the boom is lowered and the work tool is rested on the ground with a slight downward pressure.Under/Under Heel Boom
Illustration 5 g00109881
(5) Fitting. (6) Fitting.
Apply lubricant through two fittings (5) at the connection point of the boom and the stick. Apply lubricant through fitting (6) at the rod end of the stick cylinder.
Illustration 6 g00102084
(7) Fitting. (8) Fitting. (9) Fitting.
Apply lubricant through fitting (7) at the connecting point of the heel and stick pivot area. Apply lubricant through fitting (8) at the rod end of the heel cylinder. Apply lubricant through fitting (9) at the head end of the heel cylinder. Harvester
Note: Caterpillar recommends the use of 5% molybdenum grease for lubricating the boom and stick linkage. Refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" for more information on molybdenum grease.Apply lubricant through all fittings after operation under water.
Illustration 7 g01954550Wipe all fittings before you apply lubricant.
Illustration 8 g00685797
Apply lubricant through the fitting at the base of each boom cylinder.
Illustration 9 g00685798
The fittings are at the base of the boom. The fittings can be serviced from the platform on top of the storage box. To lubricate the lower boom bearings, apply lubricant through fittings (1) and (2).
Apply lubricant through fittings (3) and (4) for the boom cylinder rod.
Apply lubricant through fitting (5) for the stick cylinder head. Note: To ensure proper lubrication of the lower boom bearings and of the boom cylinder rod end bearings, lubricant should be applied through fittings (1), (2), (3), and (4). Apply lubricant first when the boom is raised and any work tool is suspended. Then apply lubricant when the boom is lowered and the work tool is rested on the ground with a slight downward pressure.
Illustration 10 g01954583
Apply lubricant through fittings (6), (7) and (8). Fitting (6) is for the bearings at the end of the stick. Fitting (7) is for the stick cylinder rod end. Fitting (8) is for the connection point of the boom and of the stick. There is a left side and a right side fitting.
Illustration 1 g01090849Wipe all fittings before you apply lubricant.
Illustration 2 g00685797
Apply lubricant through the fitting at the base of each boom cylinder.
Illustration 3 g00102079
(1) Fitting. (2) Fitting.
Apply lubricant through fittings (1) and (2) at the base of the boom.
Illustration 4 g00102081
(3) Fitting. (4) Fitting.
Apply lubricant through fitting (3) on the rod end of each boom cylinder. Apply lubricant through fitting (4) on the head end of each stick cylinder. Note: To ensure proper lubrication of the lower boom bearings and of the boom cylinder rod end bearings, lubricant should be applied through fittings (1), (2), (3) and (4). Apply lubricant first when the boom is raised and any work tool is suspended. Then apply lubricant when the boom is lowered and the work tool is rested on the ground with a slight downward pressure.Under/Under Heel Boom
Illustration 5 g00109881
(5) Fitting. (6) Fitting.
Apply lubricant through two fittings (5) at the connection point of the boom and the stick. Apply lubricant through fitting (6) at the rod end of the stick cylinder.
Illustration 6 g00102084
(7) Fitting. (8) Fitting. (9) Fitting.
Apply lubricant through fitting (7) at the connecting point of the heel and stick pivot area. Apply lubricant through fitting (8) at the rod end of the heel cylinder. Apply lubricant through fitting (9) at the head end of the heel cylinder. Harvester
Note: Caterpillar recommends the use of 5% molybdenum grease for lubricating the boom and stick linkage. Refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" for more information on molybdenum grease.Apply lubricant through all fittings after operation under water.
Illustration 7 g01954550Wipe all fittings before you apply lubricant.
Illustration 8 g00685797
Apply lubricant through the fitting at the base of each boom cylinder.
Illustration 9 g00685798
The fittings are at the base of the boom. The fittings can be serviced from the platform on top of the storage box. To lubricate the lower boom bearings, apply lubricant through fittings (1) and (2).
Apply lubricant through fittings (3) and (4) for the boom cylinder rod.
Apply lubricant through fitting (5) for the stick cylinder head. Note: To ensure proper lubrication of the lower boom bearings and of the boom cylinder rod end bearings, lubricant should be applied through fittings (1), (2), (3), and (4). Apply lubricant first when the boom is raised and any work tool is suspended. Then apply lubricant when the boom is lowered and the work tool is rested on the ground with a slight downward pressure.
Illustration 10 g01954583
Apply lubricant through fittings (6), (7) and (8). Fitting (6) is for the bearings at the end of the stick. Fitting (7) is for the stick cylinder rod end. Fitting (8) is for the connection point of the boom and of the stick. There is a left side and a right side fitting.
Caterpillar SIS machinery equipment:
Caterpillar SIS
320C, 320C L, 320C LN, 320C S Excavators BBL00001-UP (MACHINE) POWERED BY 3066 Engine »
200-3376
PUMP GP-MAIN HYDRAULIC
320C S Hydraulic Excavator EGL00001-UP (MACHINE) POWERED BY 3066 Engine »
200-3376
PUMP GP-MAIN HYDRAULIC
320C, 320C L, 320C LN Excavators DBG00001-UP (MACHINE) POWERED BY 3066 Engine »
200-3376
PUMP GP-MAIN HYDRAULIC
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
320C, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336E, 336E HVG, 336E L, 336E LN, 345D, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, M330D
320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
311C, 312C, 312C L, 314C, 318C, 319C, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN...
2003366
PUMP GP-MAIN HYDRAULIC
320C, 320C FM, 321C
320C, 320C FM, 321C
320C, 320C FM, 320C L, 321C
120G, 12G, 12H, 12H ES, 12H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16G, 16H, 16H NA, 214B, 235, 3114, 3116, 3126, 3126B, 3126E, 3176, 3176B, 3176C, 3196,...
120G, 12G, 130G, 140G, 140H, 143H, 14G, 14H, 160G, 160H, 163H, 1673C, 16H, 235B, 24H, 3116, 311C, 311D LRR, 3126, 3126B, 3126E, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315C, 315D L,...
120M, 120M 2, 12M, 140M, 140M 2, 14M, 160M, 160M 2, 16M, 215B, 215C, 215D, 219D, 225, 225D, 227, 229, 229D, 231D, 235B, 235C, 235D, 245, 245B, 245D, 311B, 311D LRR, 312, 312B L, 312C L, 312D, 312D L, ...
311C, 312C, 312C L, 314C, 318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 322C, 322C FM, 323D L, 323D LN, 323D SA, 324D, 324D FM, 324D FM LL, 324D L, 3...
2003366
PUMP GP-MAIN HYDRAULIC
320C, 320C FM, 321C
320C, 320C FM, 321C
1866423
PUMP GP-GEAR
320C, 322C
320C, 322C
2343343
PUMP & MOTOR GP-REFUELING
320C, 323D L, 323D LN
320C, 323D L, 323D LN
1660577
PUMP GP-WATER
G3516B
G3516B
1492295
PUMP GP-WATER
G3516B
G3516B
1587662
PUMP GP-METERING
924G, 924GZ, 928G, IT28G
924G, 924GZ, 928G, IT28G
928G, IT28G