PUMP GP-PISTON 20R0110 - Caterpillar

When Required
Engine Air Intake System - Clean, replace elements Ether Starting Aid (If Equipped) - Replace cylinder Fuses and Circuit Breakers - Replace fuses, reset breakers Cutting Edges and End Bits - Replace if worn or damaged Ripper Tips (If Equipped) - Replace if worn or damaged Radiator - Clean or replace pressure cap Transmission System - Clean scavenge line screens Windshield Wipers and Washer (If Equipped) - Inspect replace Winch (If Equipped) - Install wire rope cable Filter Inspection - Inspect Equalizer Bar Pins - InspectEvery 10 Service Hours or Daily
Walk-Around Inspection - Inspect machine Seat Belt - Inspect for wear or damage Engine Crankcase - Check oil level Transmission - Check oil level Hydraulic Tank - Check oil level Fuel Tank - Drain water and sediment Radiator - Check coolant level Indicators and Gauges - Test for proper function Winch (If Equipped) - Check oil level Back-up Alarm (If Equipped) - Test Air Intake System - CheckEvery 50 Service Hours or Weekly*
Track Pins - Inspect Pivot Shaft - Check oil level Cab Air System - Clean filters Ripper Linkage and Cylinder Bearings - Lubricate Equalizer Bar Center Pin - LubricateEvery 250 Service Hours or Monthly*
Engine Crankcase - Change oil and filter. If sulfur content in the fuel is more than 1.5 percent by weight, use an oil with a TBN of 30 and reduce the oil change interval by one half Cooling System - Add coolant additive Final Drives - Check oil level Transmission - Change filter element Brakes - Test Tracks - Adjust Fan Drive Bearing - Lubricate Air Conditioner (If Equipped) - Test operation - adjust belt Fan and Alternator Belts - Inspect adjust, replace Batteries - Check electrolyte level Bulldozer Tilt Brace - Lubricate Equalizer Bar Pins - LubricateEvery 500 Service Hours or 3 Months*
Hydraulic System - Change filter Engine Crankcase Breather - Clean breather Recoil Spring Compartment - Check oil level Fuel System Filter - Change filter Fuel Tank - Clean Winch Filter and Magnetic Strainer (If Equipped) - Change filter, wash magnet and strainerEvery 1000 Service Hours or 6 Months*
Transmission System - Change oil Winch (If Equipped) - Change oil, wash breather Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) - InspectEvery 2000 Service Hours or 1 Year*
Final Drives - Change oil Hydraulic Tank - Change oil Engine Valve Clearance Setting - Adjust on new, rebuilt or reconditioned engines at first oil change, then at normal interval thereafter Engine Valve Rotators - Check Track Roller Frame Guides - Measure wearEvery 3000 Service Hours or 2 Years*
Cooling System - Change coolant, clean system*First Perform Previous Service Hours Items