PUMP GP-PS-BSC-V 20R3400 - Caterpillar

(29)Towing Winch Breather
Remove and discard breather. Install a new breather.(30)Towing Winch Oil Sump
1. Remove fill and drain plugs. Allow oil to drain. Do items 27 and 28. Clean and install drain plug. 2. Fill compartment until oil is visible in the sight gauge. Clean and install fill plug. See REFILL CAPACITIES.3. Start engine and operate at low idle. Check oil level with engine running at low idle. Maintain oil level to be visible in sight gauge.(31)Cable Control
Remove breather. Wash breather in clean solvent.(32)Diesel Fuel Tank And Filler Cap
Open drain valve and drain off any sediment or water that may have accumulated. 1. Remove and disassemble cap.2. Wash cap in clean solvent. Oil elements lightly. Assemble and install cap.(33)Universal Joint And Clutch Brake
Remove floor plate and lubricate 3 fittings.(34)Cable Control Fair-Lead Sheave Lower Bearings
Remove plugs and install fittings. Lubricate 2 fittings and install plugs.(35)Final Drives
1. Remove drain plugs and allow oil to drain. 2. Remove breathers. Install new breathers.3. Install drain plugs. 4. Remove fill plugs and add oil to level of filler plug openings. See Refill Capacities.