PUMP GP-SWING 2193083 - Caterpillar

Installing The Bracket On The Motor Grader
Common Motor Graders
The information that is included in this section pertains to the most common configurations of Motor Graders. For information about installing the bracket on the 24M Motor Graders, refer to ""24M Motor Graders"".
Illustration 1 g01456755
Illustration 2 g01458185
272-3260 Bracket (slightly rotated)The new bracket can be welded on to the existing tip bracket as shown in Illustration 1.Note: The tip bracket was designed for the circle on all Motor Graders. Therefore, the bracket will not fit precisely with the circle on all Motor Graders.
Remove the paint from the surface of the circle in the location for the weld.
Protect yourself and others; read and understand this warning. Fumes and gases can be dangerous to your health. Ultraviolet rays from the weld arc can injure eyes and burn skin. Electric shock can kill. Read and understand the manufacturer's instruction and your employer's safety practices. Keep your head out of the fumes. Use ventilation, exhaust at the arc, or both, to keep fumes and gases from your breathing zone and the general area. Wear correct eye, ear and body protection. Do not touch live electric parts.Refer to the American National Standard Z49.1, "Safety in Welding and Cutting" published by the American Welding