PUMP GP-METERING 2232223 - Caterpillar

Illustration 1 g02161131
The Product Identification Number (PIN) for the machine is located on the left-hand side of the tractor. PIN plate (1) is below the operator compartment. Plate (1) will have the following information:
Illustration 2 g02436556
Model number (A) ____________________Product Identification Number (B) ____________________Service Information Plate (C) ____________________Year of Manufacture Plate (Optional) (D) ____________________CE Plate (Optional) (E) ____________________Country of Origin Info Plate (Optional) (F) ____________________Note: Local regulations may require documentation of Year of Manufacture in the Operation and Maintenance Manual. Please comply with these regulations.
Illustration 3 g02125685
Serial number plate for the transmission for the tractor is located on the back side of the transmission.Transmission serial number____________________Transmission arrangement number____________________Torque converter serial number____________________
Illustration 4 g02722443
Serial number plate for the engine can be found on top of the engine. Engine model number____________________Engine serial number____________________Engine arrangement number____________________Certification
ROPS/FOPS Structure
This message is positioned on the ROPS.
Illustration 5 g02161348
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification film. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification film.Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information.European Union
Illustration 6 g02162815
This plate is positioned on the bottom left side of plate (1) for the PIN.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.For machines compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power Primary Engine (kW)____________________
Engine Power for Additional Engine (If Equipped) ____________________
Typical Machine Operating Weight for European Market (kg)____________________
Year of Construction____________________
Machine Type ____________________For the name and address of the manufacturer, and the country of origin of the machine, refer to the PIN plate.Product Link
If equipped, this message is used to verify the certification of the Product Link as an RF transmitter. The following specifications are provided to aid in ensuring compliance with all local regulations:
Table 1
Operating frequency range     148 to 150 MHz    
Transmitter power     5-10 w    This message is located on the control group for the Product Link. The control group is located on the top of the cab.
Illustration 7 g01261742
This machine is equipped with a Caterpillar Product Link communication device. When electric/electronic detonators are used, this communication device should be deactivated within 12 m (40 ft) of a blast site, or within the distance mandated under applicable legal requirements. Failure to do so could cause interference with blasting operations and result in serious injury or death.
If the machine is required to work within 12 m (40 ft) of a blast site, power to the Product Link module must be disconnected.Consult your Cat dealer with any questions that concern the operation of the Product Link in a specific country.