2249405 PUMP GP-PISTON Caterpillar parts
267B, 268B
Rating:
Alternative (cross code) number:
CA2249405
224-9405
2249405
CA2249405
224-9405
2249405
Weight: 61 pounds 28 kg.
MULTI TERRAIN LOADER, SKID STEER LOADER,
This part in 10 request:
Show.
This information for suppliers only!
2023-06-10
2022-11-08
2022-08-17
2022-03-23
2022-02-28
2022-02-18
2022-01-29
2022-01-17
2021-05-17
2021-02-03
Number on catalog scheme:
1
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-6210 Front Seal Installer 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean the housing for the crankshaft front seal and inspect the housing for damage.
Lubricate the lip of the crankshaft front seal with clean engine oil.
Illustration 1 g00541748
Place crankshaft front oil seal (1) into the housing.
Ensure that the lip of the crankshaft front seal that is spring loaded is facing toward the inside of the front housing and that it is square with the bore of the housing for the crankshaft front seal.
Illustration 2 g00622033
Use Tooling (A) to install crankshaft front oil seal (1).
Apply clean engine oil on the area of the crankshaft pulley that will be in contact with crankshaft front seal (1). End By:
Install the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-6210 Front Seal Installer 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean the housing for the crankshaft front seal and inspect the housing for damage.
Lubricate the lip of the crankshaft front seal with clean engine oil.
Illustration 1 g00541748
Place crankshaft front oil seal (1) into the housing.
Ensure that the lip of the crankshaft front seal that is spring loaded is facing toward the inside of the front housing and that it is square with the bore of the housing for the crankshaft front seal.
Illustration 2 g00622033
Use Tooling (A) to install crankshaft front oil seal (1).
Apply clean engine oil on the area of the crankshaft pulley that will be in contact with crankshaft front seal (1). End By:
Install the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install".
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
236B, 236B3, 242B3, 246C, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 3044C, 906, 906H, 907H, 908, 908H, C3.4
2476742
PUMP GP-DIAPHRAGM
216, 228, 236, 236B, 242B, 247, 247B, 248, 267, 267B, 268B, 287, BU115, BU118, CB-14, CB-214E, CB-334D, CB-334E, CB-335D
216, 228, 236, 236B, 242B, 247, 247B, 248, 267, 267B, 268B, 287, BU115, BU118, CB-14, CB-214E, CB-334D, CB-334E, CB-335D
236B, 236B3, 242B3, 246C, 252B, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 267B, 268B, 272C, 277C, 277C2, 279C2, 287C, 287C2, 289C2, 297C, 299C, 3044C, 906, 906H, 907H, 908, 908H, C3.4
236B, 236B3, 242B3, 252B, 252B3, 257B3, 259B3, 267B, CW-34
2289236
PUMP GP-PISTON
267, 267B, 287
267, 267B, 287
2616096
PUMP & MTG GP-WORK TOOL
236B, 267B
236B, 267B
2185826
PUMP & MTG GP-WORK TOOL
267B, 268B
267B, 268B
2616097
PUMP & MTG GP-WORK TOOL
267B, 268B
267B, 268B
2208127
PUMP GP-GEAR
267B, 268B
267B, 268B
2699426
PUMP GP-GEAR
267B, 268B
267B, 268B
2699426
PUMP GP-GEAR
267B, 268B
267B, 268B
2208127
PUMP GP-GEAR
267B, 268B
267B, 268B
2616097
PUMP & MTG GP-WORK TOOL
267B, 268B
267B, 268B
2185826
PUMP & MTG GP-WORK TOOL
267B, 268B
267B, 268B
2185825
PUMP & MTG GP-GEAR
267B, 268B
267B, 268B
3056411
PUMP GP-FUEL PRM & PRIM FILTER
236B, 252B, 267B, 268B
236B, 252B, 267B, 268B
3025999
PUMP GP-PISTON & GEAR
572R II
572R II
2227994
PUMP GP-PISTON & GEAR
572R II
572R II
3020394
PUMP GP-PISTON
572R II
572R II
572R II
3025412
PUMP GP-GEAR
572R II
572R II