2285896 PUMP GP Caterpillar parts
Rating:
Alternative (cross code) number:
CA2285896
228-5896
2285896
CA2285896
228-5896
2285896
Weight: 22 pounds 10 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Diesel Fuel Pump Reconstruction Project E330C E330D C9 Fuel Injection Pump 3190678 304-0678 228-5896 312-0678 ，Compatible For CAT， C9 C7
ITGHKM Improve fuel economy: the amount and timing of fuel injection can be more precisely controlled, thus increasing fuel utilization and reducing energy consumption, which in turn improves fuel economy. || Reduced Emissions: Fuel injection technology can mix air and fuel more effectively, resulting in more complete combustion, reduced exhaust emissions and compliance with environmental standards. || Increase power output: higher combustion efficiency can be achieved, increasing the power output of the engine and better adapting to the power demand under different working conditions. || Reduced maintenance costs: Manufactured with advanced technology and materials, it has a longer service life and less maintenance needs, which can reduce maintenance costs and extend the service life of the equipment. || Compatible for CAT，E330C E330D C9,3190678 304-0678 228-5896 312-0678
ITGHKM Improve fuel economy: the amount and timing of fuel injection can be more precisely controlled, thus increasing fuel utilization and reducing energy consumption, which in turn improves fuel economy. || Reduced Emissions: Fuel injection technology can mix air and fuel more effectively, resulting in more complete combustion, reduced exhaust emissions and compliance with environmental standards. || Increase power output: higher combustion efficiency can be achieved, increasing the power output of the engine and better adapting to the power demand under different working conditions. || Reduced maintenance costs: Manufactured with advanced technology and materials, it has a longer service life and less maintenance needs, which can reduce maintenance costs and extend the service life of the equipment. || Compatible for CAT，E330C E330D C9,3190678 304-0678 228-5896 312-0678
Hacus - Forklift FPE301166 FUEL PUMP CAT C7 C9 Hacus Aftermarket - New
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
Hacus HIGH-QUALITY CONSTRUCTION: Made with premium materials; built to withstand the demands of industrial environments; offering excellent resistance to wear; corrosion; and mechanical stress. || VERSATILE COMPATIBILITY: Engineered to fit a wide range of forklift models; making it a versatile choice for various equipment configurations. || SAFETY FIRST - FPE products are ready for use with all certifications. || LEADING THE INDUSTRY - FPE is a leader in forklift products and accessories. We take pride in making the highest quality, premium, reliable forklifts on the market. || All products tested for durability, reliability, and performance.
For full view, you need register
Information:
1. Loosen adjustment screws (1). Remove six bolts and washers (2).2. Remove rocker shaft (3) and the push rods. Remove the O-ring seal from the rear support bracket. The following steps are for the installation of the rocker shaft and push rods. The O-ring seal in the rear support must be installed new each time the bolt is removed from the rear support bracket.3. Install the push rods. Position the rocker shaft assembly (3) and install bolts and washers (2).4. See the topic, Valve Rocker Arms And Lifters in the Specifications module, for Correct Torques And Adjustments.5. Make adjustments to the rocker arms in proper sequence.End By:a. install valve coverDisassemble And Assemble Rocker Shaft
Start By:a. remove rocker shaft and push rods 1. Remove O-ring seal (1) from the rear support bracket. A replacement of the O-ring seal must be made each time the head bolt is removed from the rear support bracket. 2. Remove retainer ring (6), washer (5), spring (4) and washer (3) from each end of rocker shaft. Remove rocker arm (2). 3. Remove pin from rear support bracket with a hammer and punch. Remove rear support bracket (7) from shaft.4. Remove remainder of rocker arms, springs, washers and brackets.5. Remove plugs from each end of the shaft if necessary. The following steps are for the assembly of the rocker shaft. 6. Install rocker arms (2), brackets (8), washers (5) and springs (4) on the rocker shaft.7. Install rear support bracket (7) on rocker shaft. Make sure hole in rear support bracket is in alignment with hole in rocker shaft.8. Install pin (9) through bracket and shaft with a hammer.9. Pin (9) must extend 9.60 mm (.378 in.) above the bracket.10. Install O-ring seal (1) in the rear support bracket. Install rocker arm (2), washer, spring, washer and retainer ring on the rocker shaft.11. Install the plugs in each end of the rocker shaft if they were removed.End By:a. install rocker shaft and push rods
Start By:a. remove rocker shaft and push rods 1. Remove O-ring seal (1) from the rear support bracket. A replacement of the O-ring seal must be made each time the head bolt is removed from the rear support bracket. 2. Remove retainer ring (6), washer (5), spring (4) and washer (3) from each end of rocker shaft. Remove rocker arm (2). 3. Remove pin from rear support bracket with a hammer and punch. Remove rear support bracket (7) from shaft.4. Remove remainder of rocker arms, springs, washers and brackets.5. Remove plugs from each end of the shaft if necessary. The following steps are for the assembly of the rocker shaft. 6. Install rocker arms (2), brackets (8), washers (5) and springs (4) on the rocker shaft.7. Install rear support bracket (7) on rocker shaft. Make sure hole in rear support bracket is in alignment with hole in rocker shaft.8. Install pin (9) through bracket and shaft with a hammer.9. Pin (9) must extend 9.60 mm (.378 in.) above the bracket.10. Install O-ring seal (1) in the rear support bracket. Install rocker arm (2), washer, spring, washer and retainer ring on the rocker shaft.11. Install the plugs in each end of the rocker shaft if they were removed.End By:a. install rocker shaft and push rods
Parts pump Caterpillar catalog:
2285115
PUMP GP
Caterpillar
Caterpillar
2285114
PUMP GP
Caterpillar
Caterpillar
2285113
PUMP GP-HS OIL
Caterpillar
Caterpillar
2281914
PUMP GP-GR A
Caterpillar
Caterpillar
2281834
PUMP GP-A
Caterpillar
Caterpillar
2279579
PUMP GP-MTG&
Caterpillar
Caterpillar
2293792
PUMP GP-PS-
Caterpillar
Caterpillar
2293788
PUMP GP
Caterpillar
Caterpillar
2292287
PUMP GP-
Caterpillar
Caterpillar
2289726
PUMP GP-COLOR
Caterpillar
Caterpillar
2286925
PUMP GP-
Caterpillar
Caterpillar
2285898
PUMP GP
Caterpillar
Caterpillar