PUMP GP-PISTON 2298573 - Caterpillar

c) Install sleeves (4) in the accumulator body.2. Disassemble and assemble the governor cutoff valve as follows: a) Remove plugs (6) and (9) from governor cutoff valve body (5). Remove governor cutoff valve spool (8) and spring (7). b) Install governor cutoff valve spool (8) spring (7) and plugs (6) and (9) in governor cutoff valve body (5). Tighten the plugs to a torque of 35 5 lb.ft. (47.5 6.8 N m).3. Disassemble the automatic selector valve as follows: a) Remove bolts (12) and strips (11) from both sides of automatic selector valve body (10).b) Remove hydraulic shifter valve spool (20) and retainer. Remove manual selector valve spool (19). Remove stop (18), slug, valve spool (15) for 7th to 8th shift, and slug. Remove stop (17), slug, valve spool (13), for 6th to 7th shift, and slug. Remove stop (16), slug, valve spool (14), for 5th to 6th shift, and slug. Valve spools and valve body have identification by letters. Keep the valve spools and their parts together so they can be assembled correctly. c) Remove stop, (21) slug, valve spool (22), for 4th to 5th shift, and slug. Remove stop (24), slug, valve spool (23), for 3rd to 4th shift, and slug. Remove stop (25), slug, valve spool (26), for 2nd to 3rd shift, and slug. Remove retainer (27) from the automatic selector valve body. 4. Assemble the automatic selector valve as follows: a) Install the slugs in valve spool (26), for 2nd to 3rd shift. Install valve spool (26) and stop (25) in automatic selector valve body (10) as shown. Install the slugs in valve spool (23), for 3rd to 4th shift. Install valve spool (23) and stop (24) in the valve body as shown. Install the slugs in valve spool (22), for 4th to 5th shift. Install valve spool (22) and stop (21) in the valve body as shown. Install the slugs in valve spool (14), for 5th to 6th shift. Install valve spool (14) and stop (16) in the valve body as shown. Install the slugs in valve spool (13), for 6th to 7th shift. Install valve spool (13) and stop (17) in the valve body as shown. Install the slugs in valve spool (15), for 7th to 8th shift. Install valve spool (15) and stop (18) in the valve body as shown.b) Put strips (11) in position on the valve body and install the bolts that hold them in place. Tighten the bolts to a torque of 22 3 lb.ft. (29.8 4.1 N m).c) Install manual selector valve spool (19), hydraulic shifter valve spool (20) and retainer in the valve body as shown.d) Install the other retainer (27) and bolts (12) in the valve body. Tighten the bolts to a torque of 22 3 lb.ft. (29.8 4.1 N m).5. Disassemble the shift pressure control valve as follows: a) Remove covers (29), (31), (32) and strip (30) from shift pressure control valve body (28). b) Remove spacers