PUMP GP-WATER 2304172 - Caterpillar

(S/N: S2T1-UP; S2X1-UP)3516C (S/N: TTJ1-UP; JTS1-UP)Hydraulic Shovel6060 FS (S/N: DH31-UP)Off-Highway Truck/Tractor785D (S/N: MSY1-UP)Petroleum Engine3512C PETROLEUM (S/N: R1A1-UP; R1S1-UP)3516C PETROLEUM (S/N: PES1-UP)PumperSPF343C (S/N: RTX1-UP)Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Incorrect rods were found assembled on a few Reman 3500 HD cylinder packs. These packs were built with 0R-9200 Connecting Rods (Standard Displacement Rods). If installed, these incorrectly assembled packs could result in white smoke and poor engine operation, and would require immediate replacement.Solution
Illustration 1 g06283062Inspect the following Reman 3500 HD cylinder packs prior to installation:
10R-4029 Cylinder Pack As
10R-9267 Cylinder Pack As
20R-0582 Cylinder Pack As
20R-0583 Cylinder Pack As
20R-5616 Cylinder Pack AsInspect for the presence of a wrist pin oil passage at the cap end of the rod, refer to Illustration 1. If no passage is present, submit a Parts Technical ticket in the PSCRM system and include pictures of the packaging label and part number etched on the rod cap.