PUMP GP-GR-A 2305571 - Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, and filters. The user is also responsible for the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components. Use fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Cooling System Water Temperature Regulator - Replace
Daily
Cooling System Coolant Level - Check
Engine Oil Level - Check
Walk-Around Inspection
Every Month
Engine Oil Sample - Obtain
Every 250 Service Hours
Diesel Exhaust Fluid System - Inspect
Every 1000 Service Hours or Every 92 Day FRA Inspection
Cooling System Coolant Sample (Level 1) - Obtain
Engine Oil and Filter - Change
Hoses and Clamps - Inspect/Replace
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
Every 2000 Service Hours or Every 184 Day FRA Inspection
Air Inlet Piping - Inspect
Exhaust Piping - Inspect
Fumes Disposal Filter Element - Replace
Fuel System Secondary Filter - Replace
Every Year
Diesel Exhaust Fluid Nozzle - Inspect/Clean
Filter Screen (Air) - Inspect/Clean
Filter Screen (DEF) - Inspect/Clean
Cooling System Coolant Sample (Level 1) - Obtain
Cooling System Coolant Sample (Level 2) - Obtain
Electric Starting Motor - Inspect
Every 2 Years
Diesel Exhaust Fluid Pump - Inspect/Test
Every 2000 Service Hours
Crankshaft Vibration Damper - Inspect
Speed Sensor - Clean/Inspect
Every 3000 Service Hours or 3 Years
Cooling System Coolant (ELC) - Change
Every 3000 Service Hours
Fuel Pump (High Pressure) - Replace
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 6000 Service Hours or 6 Years
Cooling System Water Temperature Regulator - Replace
Every 9000 Service Hours
Fuel Injector - Replace
Turbocharger - Replace
Prelube Pump - Inspect
Nitrogen Oxide Sensor - Replace
Water Pump - Inspect
Engine Valve Lash - Adjust
Pushrods (HLA) - Replace
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change
Every 5 110 000 L (1 350 000 US gal) of Fuel or 18 000 Service Hours
Overhaul (Intermediate)
Overhaul
Aftercooler Core - Inspect/Clean
Overhaul Considerations
Overhaul (Major)
Thermostatic Valve - Inspect