PUMP GP-ENGINE OIL 2332744 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     9U-6895     Valve Guide Driver     1    
B     9U-6894     Guide Collar     1    Start By:
Remove the inlet and exhaust valves.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01073841
Remove valve stem seal (1) from valve guide (2) .
Use Tooling (A) and a hammer to remove the valve guide from the cylinder head.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01073842
Lubricate the bores for the valve guides with clean engine oil.
Install valve guide (2) in the cylinder head with Tooling (A) and Tooling (B) .Note: Tooling (B) must be used in order to install the valve guide to the correct height.Note: For more information, refer to Specifications, "Cylinder Head Valves".
Install valve stem seal (1) on the valve guide.End By: Install the inlet and exhaust valves.