2349147 PUMP GP-CHARGE Caterpillar parts
D4G, D5G, TH31-E61, TH35-E81
Rating:
Alternative (cross code) number:
CA2349147
234-9147
2349147
CA2349147
234-9147
2349147
Weight: 6 pounds 2 kg.
PETROLEUM TRANSMISSION, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Oxygen Sensor Upstream 234-9147 for 14-17 17-18 1.6L 22693-BV80A 2349147 Replacement Oxygen Sensor
LJSM OEM NO.: 234-9147. || Replace For Part Number: 2349147, 22693-BV80A, 22693BV80A,234-9147, 22693 BV80A. || Oxygen Sensor Made from durable material, Facilitate easy installation. || Solution to address your any concern! we will provide you with satisfactory solutions in the first time.
LJSM OEM NO.: 234-9147. || Replace For Part Number: 2349147, 22693-BV80A, 22693BV80A,234-9147, 22693 BV80A. || Oxygen Sensor Made from durable material, Facilitate easy installation. || Solution to address your any concern! we will provide you with satisfactory solutions in the first time.
Embellu 2PCS 234-4985 234-9147 Upstream & Downstream Oxygen O2 Sensor Compatible with Nissan Juke 2015-2017 L4 1.6L AWD 22693-BV80A 226A0-4JM0B
Embellu Upstream:234-9147,22693-BV80A || Downstream:234-4985,226A0-4JM0B, 226A0-BV80A, 226A0-BV81A || Before purchasing, please check if the OE number, model, and appearance image match to avoid errors. || If you cannot guarantee that the product you want to replace is the same, please provide us with pictures of the product you want to replace, and we will help you obtain the correct parts. || If you have any questions about the product, we will reply to you within 24 hours.
Embellu Upstream:234-9147,22693-BV80A || Downstream:234-4985,226A0-4JM0B, 226A0-BV80A, 226A0-BV81A || Before purchasing, please check if the OE number, model, and appearance image match to avoid errors. || If you cannot guarantee that the product you want to replace is the same, please provide us with pictures of the product you want to replace, and we will help you obtain the correct parts. || If you have any questions about the product, we will reply to you within 24 hours.
Oxygen Sensor 234-9147 is Suitable for Nissan Juke 14-17 Sentra 17-18 1.6L-
JKAPCYJFHF Condition:New |Number of Sensors:1|Number of Pieces:1|Fitment Type:Direct Replacement|Terminal Type:Blade & Bullet|Manufacturer Part Number:234-9147|Material:Metal, Plastic|Superseded Part Number:234-9147, 22693 BV80A|Placement on Vehicle:Front, Upper, Upstream, Pre-cat|Brand:Unbranded|Type:Sensor|Interchange Part Number:2349147, 22693-BV80A, 22693BV80A|Manufacturer Warranty:3 Years|OE/OEM Part Number:234-9147|Features:Direct Fit, Easy Installation|Universal Fitment:No|UPC:700000721089 || High-Quality Materials: Made from premium materials to ensure durability and long service life. Corrosion-resistant and oxidation-resistant, maintaining excellent performance in various harsh environments. || Perfect Fit: Precisely matched using OE numbers, directly replacing original parts with no modifications needed, ensuring seamless installation and perfect fit. || Superior Performance: Delivers exceptional performance enhancements in comfort, safety, and fuel efficiency. Rigorously tested to guarantee product reliability and stability. || Safety Assurance: Complies with strict industry standards and regulations, ensuring product safety and reliability. Provides peace of mind while driving.
JKAPCYJFHF Condition:New |Number of Sensors:1|Number of Pieces:1|Fitment Type:Direct Replacement|Terminal Type:Blade & Bullet|Manufacturer Part Number:234-9147|Material:Metal, Plastic|Superseded Part Number:234-9147, 22693 BV80A|Placement on Vehicle:Front, Upper, Upstream, Pre-cat|Brand:Unbranded|Type:Sensor|Interchange Part Number:2349147, 22693-BV80A, 22693BV80A|Manufacturer Warranty:3 Years|OE/OEM Part Number:234-9147|Features:Direct Fit, Easy Installation|Universal Fitment:No|UPC:700000721089 || High-Quality Materials: Made from premium materials to ensure durability and long service life. Corrosion-resistant and oxidation-resistant, maintaining excellent performance in various harsh environments. || Perfect Fit: Precisely matched using OE numbers, directly replacing original parts with no modifications needed, ensuring seamless installation and perfect fit. || Superior Performance: Delivers exceptional performance enhancements in comfort, safety, and fuel efficiency. Rigorously tested to guarantee product reliability and stability. || Safety Assurance: Complies with strict industry standards and regulations, ensuring product safety and reliability. Provides peace of mind while driving.
Number on catalog scheme:
4
For full view, you need register
Compatible equipment models: 2349147:
Information:
Remove Water Pump
1. Drain the coolant from the cooling system.2. Remove one half of the fan guard from the right side of the machine.3. Remove air compressor water line (3) from the engine.4. Disconnect hose (2) from the water pump elbow.5. Loosen the hose clamps for the short hose behind hose (2).6. Loosen hose clamps (6) and push the hose down away from the pump.7. Remove two bolts (5) and the two bolts (1). Remove water pump (4) and elbow from the engine as a unit. The weight is 35 lb. (16 kg).Install Water Pump
1. Inspect the O-ring seal for the water pump. Install a new seal if needed. 2. Put water pump (1) and the elbow in position as a unit. Make sure the gasket for the elbow is in position and install the bolts that hold the elbow and water pump.3. Connect the water pump elbow to the cylinder block with the short hose and tighten the hose clamps.4. Move the bottom hose up on the water pump and tighten the clamps.5. Connect the heater hose to the water pump.6. Install the air compressor coolant line.7. Install the fan guard.8. Fill the cooling system with coolant to the correct level.Disassemble Water Pump
start by:a) remove water pump 1. Remove cover (1) from water pump (2). 2. Loosen bolt (3) .25 in. (6.35 mm). Hit the bolt with a soft hammer to remove impeller (4) from the shaft. 3. Remove spring and seal assembly (5) from the shaft (6). 4. Turn the housing over and remove bolt and washer (7). Remove bearing (8) and gear (9) as a unit. 5. Use tool (A), tooling (C) and a press to remove bearing (8) from gear (9). 6. Remove snap ring (10) with tool (B). 7. Remove bearing (11) and shaft (6) as a unit. 8. Use tool (A) and a press to remove bearing (11) from the shaft. 9. Remove the ceramic ring and seal (12) from the housing. 10. Remove the lip seal (13) from the housing with tool (C).Assemble Water Pump
1. Install lip seal in water pump housing with tooling (A). The lip of the seal must be toward the bearings. Put clean SAE 30 engine oil on the lip of the seal. 2. Use a press to install shaft (1) in bearing (2). 3. Install the shaft (1) and bearing in the housing (3). 4. Install snap ring (4) in housing with tool (B). 5. Use a press and tooling (A) to install bearing (5) on gear (6). 6. Put gear (6) and bearing in position on shaft and install bolt and washer.
Clean water only is permitted for use as a lubricant for assembly. Do not damage or put hands on the wear surface of the carbon ring or the ceramic ring. Install the ceramic ring with the smoothest face of the ring toward the carbon seal assembly.
7. Put the ceramic ring (7) in position in the rubber seal. Use hand pressure and the tool (which
1. Drain the coolant from the cooling system.2. Remove one half of the fan guard from the right side of the machine.3. Remove air compressor water line (3) from the engine.4. Disconnect hose (2) from the water pump elbow.5. Loosen the hose clamps for the short hose behind hose (2).6. Loosen hose clamps (6) and push the hose down away from the pump.7. Remove two bolts (5) and the two bolts (1). Remove water pump (4) and elbow from the engine as a unit. The weight is 35 lb. (16 kg).Install Water Pump
1. Inspect the O-ring seal for the water pump. Install a new seal if needed. 2. Put water pump (1) and the elbow in position as a unit. Make sure the gasket for the elbow is in position and install the bolts that hold the elbow and water pump.3. Connect the water pump elbow to the cylinder block with the short hose and tighten the hose clamps.4. Move the bottom hose up on the water pump and tighten the clamps.5. Connect the heater hose to the water pump.6. Install the air compressor coolant line.7. Install the fan guard.8. Fill the cooling system with coolant to the correct level.Disassemble Water Pump
start by:a) remove water pump 1. Remove cover (1) from water pump (2). 2. Loosen bolt (3) .25 in. (6.35 mm). Hit the bolt with a soft hammer to remove impeller (4) from the shaft. 3. Remove spring and seal assembly (5) from the shaft (6). 4. Turn the housing over and remove bolt and washer (7). Remove bearing (8) and gear (9) as a unit. 5. Use tool (A), tooling (C) and a press to remove bearing (8) from gear (9). 6. Remove snap ring (10) with tool (B). 7. Remove bearing (11) and shaft (6) as a unit. 8. Use tool (A) and a press to remove bearing (11) from the shaft. 9. Remove the ceramic ring and seal (12) from the housing. 10. Remove the lip seal (13) from the housing with tool (C).Assemble Water Pump
1. Install lip seal in water pump housing with tooling (A). The lip of the seal must be toward the bearings. Put clean SAE 30 engine oil on the lip of the seal. 2. Use a press to install shaft (1) in bearing (2). 3. Install the shaft (1) and bearing in the housing (3). 4. Install snap ring (4) in housing with tool (B). 5. Use a press and tooling (A) to install bearing (5) on gear (6). 6. Put gear (6) and bearing in position on shaft and install bolt and washer.
Clean water only is permitted for use as a lubricant for assembly. Do not damage or put hands on the wear surface of the carbon ring or the ceramic ring. Install the ceramic ring with the smoothest face of the ring toward the carbon seal assembly.
7. Put the ceramic ring (7) in position in the rubber seal. Use hand pressure and the tool (which
Caterpillar SIS machinery equipment:
Caterpillar SIS
D4G XL & D4G LGP Track-Type Tractors HYD00001-UP (MACHINE) POWERED BY 3046 Engine »
234-9147
PUMP GP-CHARGE
D5G XL & D5G LGP Track-Type Tractors RKG00001-UP (MACHINE) POWERED BY 3046 Engine »
234-9147
PUMP GP-CHARGE
TH31-E61 Well Servicing Transmission & C9/TH31-E61 Well Servicing Power System LAD00001-UP »
234-9147
PUMP GP-CHARGE
TH35-E81 Well Servicing Transmission & C11, C13, C15/TH35-E81 Well Servicing System MSB00001-UP »
234-9147
PUMP GP-CHARGE
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
414E, 416D, 416E, 420D, 420E, 422E, 424D, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 442D, 442E, 444E, D3G, D4G, D5G
414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 442D, 442E, 444E, 444F, D3G, D4G, D5G
D3C III, D3G, D4C III, D4G, D5C III, D5G
315, 315B, 315B FM L, 315C, 317B LN, 318B, D3C III, D3G, D4C III, D4G, D5C III, D5G
D4G, D5G
CX35-P800, D3C III, D6N, D6T, D6T LGP, D6T LGPPAT, D6T XL, TH31-E61, TH35-E81
2972371
PUMP GP-PISTON
CX35-P800, TH31-E61, TH35-E81
CX35-P800, TH31-E61, TH35-E81
2510997
PUMP GP-GEAR
735, TH35-E81
735, TH35-E81
735, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I, TH35-C15T, TH35-E81
2613629
PUMP GP-PISTON
953D, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
953D, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G
4W5607
PUMP GP-GOV & FUEL INJ
3208, CB-614, CS-551, PS-500
3208, CB-614, CS-551, PS-500
1697279
PUMP GP-FUEL PRM & PRIM FILTER
235B, 572R, D7R
235B, 572R, D7R
9T6769
PUMP & FITTING GP
926, G926, IT28B
926, G926, IT28B
1415951
PUMP & MTG GP-AUXILIARY
322B L, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, M325C MH
322B L, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, M325C MH
1539185
PUMP GP-MAIN HYDRAULIC
330B L, W330B
330B L, W330B
3367918
PUMP & MTG GP-TAMPER
AP1000E, AP1055E, BG1000E, BG1055E
AP1000E, AP1055E, BG1000E, BG1055E
1761746
PUMP GP-PISTON
D3G, D4G, D5G
D3G, D4G, D5G
3072847
PUMP GP-FUEL INJECTION
C4.4, CB-54B
C4.4, CB-54B
2693126
PUMP GP-PISTON
CB-534D, CB-564D
CB-534D, CB-564D