2445214 PUMP & MTG GP-AUXILIARY Caterpillar parts
311C, 314C
Rating:
Alternative (cross code) number:
CA2445214
244-5214
2445214
CA2445214
244-5214
2445214
EXCAVATOR,
Number on catalog scheme:
For full view, you need register
Information:
Installation Procedure
Illustration 1 g01947660
Disassemble two bolts (A) and remove the bracket. Remove two armrest (B) from both sides of the seat.
Illustration 2 g01947675
View of the seat that has the armrest removed
Illustration 3 g01947679
Remove the 9V-7447 Pad As (C) from armrest (B). Remove the 5S-7383 Bolt (D), 2K-4973 Locknut (E) and two 8Y-6277 Spacers (F). Retain the parts that were removed for use at a later time.
Illustration 4 g01947691
(G) The dimension for the D6G Series II is 463.5 mm (18.25 inch). (G) The dimension for the D7G Series II is 464 mm (18.27 inch). (H) The dimension for the D6G Series II is 112.5 mm (4.43 inch). (H) The dimension for the D7G Series II is 125.5 mm (4.94 inch). (J) The dimension for the D6G Series II is 237.5 mm (9.35 inch). (J) The dimension for the D7G Series II is 257.5 mm (10.14 inch).
Drill two holes on the seat support on both sides with a diameter of 16.75 mm (0.66 inch).
Illustration 5 g01947818
View of the holes (K) that were drilled in Step 3Note: The range of adjustment for both models from lowest point to the highest point is 100 mm (3.94 inch).
Illustration 6 g01947830
Weld two 8T-3490 Weld Nuts (7) at the inner side of the seat support in the holes that were drilled in Step 3. Weld the weld nuts on both sides.
Illustration 7 g01947986
Assemble the armrest and the bracket on the seat support.Note: The 333-2225 Bracket (2) is for the right hand side. The 333-2226 Bracket (3) is for the left hand side.
Illustration 8 g01948017
View of the assembled armrest and bracket on the seat support
Illustration 9 g01948048
Assemble the armrest on to the 333-2225 Bracket (right hand side) and the 333-2226 Bracket (left hand side) by using the parts that were retained from Step 3.
Illustration 10 g01948053
View of the finished left and right side armrestThe new adjustable armrest is effective with the following machines:
D6G C6G1397-UP
D6G P6G1251-UP
D6G Series II LGPC6X124-UP
D7G 7MB5268-UP
D7G C7G1210-UPThe new adjustable armrest is adaptable to the following machines:
D6G C6G1-1396
D6G P6G1-1250
D6G Series II LGPC6X1-123
D7G 7MB1-5267
D7G C7G1-1209
Illustration 1 g01947660
Disassemble two bolts (A) and remove the bracket. Remove two armrest (B) from both sides of the seat.
Illustration 2 g01947675
View of the seat that has the armrest removed
Illustration 3 g01947679
Remove the 9V-7447 Pad As (C) from armrest (B). Remove the 5S-7383 Bolt (D), 2K-4973 Locknut (E) and two 8Y-6277 Spacers (F). Retain the parts that were removed for use at a later time.
Illustration 4 g01947691
(G) The dimension for the D6G Series II is 463.5 mm (18.25 inch). (G) The dimension for the D7G Series II is 464 mm (18.27 inch). (H) The dimension for the D6G Series II is 112.5 mm (4.43 inch). (H) The dimension for the D7G Series II is 125.5 mm (4.94 inch). (J) The dimension for the D6G Series II is 237.5 mm (9.35 inch). (J) The dimension for the D7G Series II is 257.5 mm (10.14 inch).
Drill two holes on the seat support on both sides with a diameter of 16.75 mm (0.66 inch).
Illustration 5 g01947818
View of the holes (K) that were drilled in Step 3Note: The range of adjustment for both models from lowest point to the highest point is 100 mm (3.94 inch).
Illustration 6 g01947830
Weld two 8T-3490 Weld Nuts (7) at the inner side of the seat support in the holes that were drilled in Step 3. Weld the weld nuts on both sides.
Illustration 7 g01947986
Assemble the armrest and the bracket on the seat support.Note: The 333-2225 Bracket (2) is for the right hand side. The 333-2226 Bracket (3) is for the left hand side.
Illustration 8 g01948017
View of the assembled armrest and bracket on the seat support
Illustration 9 g01948048
Assemble the armrest on to the 333-2225 Bracket (right hand side) and the 333-2226 Bracket (left hand side) by using the parts that were retained from Step 3.
Illustration 10 g01948053
View of the finished left and right side armrestThe new adjustable armrest is effective with the following machines:
D6G C6G1397-UP
D6G P6G1251-UP
D6G Series II LGPC6X124-UP
D7G 7MB5268-UP
D7G C7G1210-UPThe new adjustable armrest is adaptable to the following machines:
D6G C6G1-1396
D6G P6G1-1250
D6G Series II LGPC6X1-123
D7G 7MB1-5267
D7G C7G1-1209
Caterpillar SIS machinery equipment:
Caterpillar SIS
311C U Excavator CKE00001-UP (MACHINE) POWERED BY 3064 Engine »
244-5214
PUMP & MTG GP-AUXILIARY
314C CR & 314C LCR Excavators KJA00001-UP (MACHINE) POWERED BY 3064 Engine »
244-5214
PUMP & MTG GP-AUXILIARY
311C U Excavator PAD00001-UP (MACHINE) POWERED BY 3064 Engine »
244-5214
PUMP & MTG GP-AUXILIARY
314C CR Excavator SNY00001-UP (MACHINE) POWERED BY 3064 Engine »
244-5214
PUMP & MTG GP-AUXILIARY
Caterpillar parts catalog:
Parts pump Caterpillar catalog:
311C, 312C, 312C L, 314C, 318C, 319C, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN...
2128469
PUMP GP-FUEL INJECTION
312C, 312C L, 314C
312C, 312C L, 314C
120G, 12G, 130G, 140G, 140H, 143H, 14G, 14H, 160G, 160H, 163H, 1673C, 16H, 235B, 24H, 3116, 311C, 311D LRR, 3126, 3126B, 3126E, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315C, 315D L,...
1262078
PUMP GP-GEAR
311B, 311C, 312B, 314C, 315B FM L, 317B LN, 318B
311B, 311C, 312B, 314C, 315B FM L, 317B LN, 318B
311C, 312C, 312C L, 314C, 318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 321C, 323D L, 323D LN
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315C, 315D L, 318D L, 319D, 319D L, 319D LN
2223188
PUMP GP-PISTON
564, 574B
564, 574B
1961907
PUMP GP-FUEL PRM & PRIM FILTER
120H, 135H
120H, 135H
14H, 16H
2377627
PUMP & MTG GP-PISTON
14H, 16H
14H, 16H