PUMP GP-GEAR 2448872 - Caterpillar

Illustration 2 g02792360
Section A-A
Table 2
Item     Qty     Part     Specification Description    
E     4     192-0573 Dowel Pin     Extension of the dowel pin from the surface of the body (6) is
2.67 to 2.92 mm (0.105 to 0.115 inch).    
7     4     193-1736 O-Ring Seal     Lubricate lightly with the lubricant that is being sealed.    
8     1     256-0083 Pump Barrel As     Port location must be opposite phase when the right pump and the left pump assemble.    
9     1     273-8314 O-Ring Seal     Lubricate lightly with the lubricant that is being sealed.    
10     2     190-4896 Plug     Before assembly, apply blue Loctite High Flex GM to the threads.    
Torque to
25 3 N m (221 275 lb in).
11     2     273-8315 O-Ring Seal     Lubricate lightly with the lubricant that is being sealed.    
12     18     096-4389 Spring     Length under test force is
31.0 mm (1.22 inch).    
Test force is
360 49 N (81 11 lb).
Free length after test is
33.7 mm (1.33 inch).
Illustration 3 g02792361
Section F-F
Illustration 4 g02792362
Section G-G
Table 3
Item     Qty     Part     Specification Description    
13     2     7M-8485 O-Ring Seal     Lubricate lightly with the lubricant that is being sealed.    
14     1     096-3944 O-Ring Seal     Lubricate lightly with the lubricant that is being sealed.    
15     1     341-2862 Lip Type Seal     Lightly lubricate the sealing lip with the lubricant that is being sealed.    
16     2     8T-4136 Bolt     Torque to
44 4 N m (32 3 lb ft).    
17     1     256-0081 Drive Barrel     Port location must be opposite phase when the right pump and the left pump assemble.    
H     4     094-1875 Dowel     Extension of the dowel from the body (18) is
5.55 to 5.80 mm (0.219 to 0.228 inch).