PUMP GP-MAIN HYDRAULIC 2478783 - Caterpillar

Illustration 7 g01035560
Switches windowThe header information in this screen includes:Switch - Up to six switches can be configuredConfiguration - Indicates the function that the switch has been configured to trigger on. For example, Switch 0 has been configured to trigger when the machine bucket is either loading or diggingState - Set or Clear. Shows the current state of the switch. The switch state is Set when the switch is active; otherwise the switch state is ClearRaw - 1 or 0. When the input is switched to ground, the Raw value is 0Linkage Positions Window
The Linkage Positions window shows position information for Excavator and Front Shovel linkage points. This window is only used for Excavator or Front Shovel dual-antenna GPS systems.Use the following steps in order to open the Linkage Positions window:
Open the CAESultra main menu.
Select the "Diagnostics" menu item. The Diagnostic menu opens.
Select "Linkage Positions". The Linkage Positions window opens.If the machine and linkage points are static, then the positions in the linkage positions window do not update. In order to get the latest update, move the bucket tip or use Update Position.
Illustration 8 g01180292
Linkage Positions windowThe header information in this window includes:Type - The linkage point on the machineEast - The linkage point's Easting value in local coordinatesNorth - The linkage point's Northing value in local coordinatesElevation - The linkage point's local ElevationReach - The horizontal distance from the Boom linkage to the linkage pointHeight - The vertical distance from the boom linkage to the linkage pointAnnunciators
The Annunciators window provides information about the state of the various audible signals. This window can be used without having an audible device connected.Annunciators are devices that provide an audible signal. The audible signals warn the operator of various issues that are detected by CAESultra. For example, the audible device can be configured in order to sound when the quality of the GPS position is low. Use the following steps in order to open the Annunciators window:
Open the CAESultra main menu.
Select the "Diagnostics" menu item. The Diagnostic menu opens.
Select "Annunciators". The Annunciators window opens.
Illustration 9 g01044692
The Annunciators window shows that both the"Truck select" and the "Below grade" signals are on. The state of the audible signal is "Delay" indicating that the signal is between cycles.Table 4 provides a description of the columns in the Annunciators window.
Table 4
Column    Description    
B     Buzzer - The audible signal number    
Function     The function