PUMP GP-MTG& 2501171 - Caterpillar

Illustration 1 g03871091
Typical example
New 153-5906 Glass (1) and 3E-9413 Seal (2) are now available for all machines listed above.Use the following procedure to install new 3E-9413 Seal in the window.
Table 1
Required Tools
Quantity Part Number Part Name
1 5H-4845 Seal Installer Gp
Measure the height and width of the glass. Multiply the numbers into two times to get the actual length of seal to be cut.
Cut the seal with the measured dimensions.
Push the seal onto the window frame opening with the ends touching at the bottom of the window frame. This assembly will ensure better sealing and prevents entry of water from the top.
Spray the seal with a solution of soap and water to make window slide into place more easily.
Insert the glass into the bottom channel of the window seal. This action will support the weight of the glass.
Use a plastic installation tool to work the window seal over and around the glass. Ensure that the seal is fully seated in the inside channel of the window seal.
Use a seal key tool to lock the key into itself all the way around the window.
Wipe off any spray or smudges on the window.