PUMP GP- 2610092 - Caterpillar

Illustration 1 g00110555
Open the engine hood. The air filter and the air filter service indicator are located on the right side of the machine.
Illustration 2 g00101864
Remove the cover (1) on the air filter housing.
Remove the primary filter element (2) from the air filter housing.
Do not clean the filter elements by bumping or tapping them. Do not use filter elements with damaged pleats, gaskets or seals. Engine damage can result.Make sure the cleaned filter elements are completely dry before installing into the filter housing. Water remaining in the elements can cause false indications of contamination in Scheduled Oil Sampling test results.
The filter elements can be cleaned by using the following methods:
pressure air
pressure water
detergent washingWhen you use pressure air, the maximum air pressure is 205 kPa (30 psi). When you use pressure water, the maximum water pressure is 280 kPa (40 psi).
Illustration 3 g00038608
When you clean the inside pleats and the outside pleats, direct the air along the pleats or direct the water along the pleats.The element can be washed in a solution that consists of warm water and of nonsudsing household detergent. Fully rinse the pleats. Allow the filter to air dry completely.
Inspect the primary element after you clean the primary element. Do not use a filter if the pleats, the gaskets or the seals are damaged.
Cover the clean filter elements. Store the elements in a clean, dry location.A primary element may be cleaned for a maximum of six times. Also replace the primary element if the primary element has been in service for one year.
Install the primary filter element (2) .
Clean the cover (1) on the air filter housing. Install the cover (1) on the air filter housing. Fasten the clips in order to secure the cover on the air filter housing.
Illustration 4 g00580389
Reset the air filter service indicator.
Close the engine hood.