PUMP GP-WATER 2610961 - Caterpillar

Illustration 1 g02576298
Front view
Illustration 2 g02576299
Section A-A
Table 1
Specification for the 334-5320 Accessory Drive Gp
Item Qty Part Specification Description
1 1 259-4598 O-Ring Seal Before assembly, lightly lubricate the bore with the fluid that is being sealed.
2 1 116-3242 Idler Gear As After assembly, bore of 116-1365 Bearing is 105.970 0.010 mm (4.1720 0.0004 inch).
Installation depth is 2.3 0.5 mm (0.09 0.02 inch).
3 1 7C-3257 Thrust Washer Thickness of new thrust washer is 7.00 0.15 mm (0.276 0.006 inch).
B 1 7C-3259 Shaft Diameter is 105.880 0.020 mm (4.1685 0.0008 inch).
C 1 7N-5874 Auxiliary Drive Shaft Diameter is 74.900 0.015 mm (2.9488 0.0006 inch).
Width of groove for thrust washer is 8.75 0.10 mm (0.344 0.004 inch).
Bore in the 2W-7320 Accessory Drive Gear is 74.980 0.025 mm (2.9520 0.0010 inch).
4 1 7N-7539 Thrust Washer Thickness of one new thrust washer is 8.50 0.05 mm (0.335 0.002 inch).