PUMP GP-GEAR 2653704 - Caterpillar

Illustration 4 g00829645
Install bolts (19) and the washers in both ends of the control assembly.
Illustration 5 g00829627
Install the magnetic spacers, the plates, the washers, and bolts (18).
Illustration 6 g00829626
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install springs (17).
Illustration 7 g00829625
Illustration 8 g00829623
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install spacers (16) and any additional hardware. Install control assembly (15).
Illustration 9 g00829593
Install rods (14) in order to hold control assembly (15) in place.
Illustration 10 g00829592
Install nuts (13) and the washers.
Illustration 11 g00829591
Connect harness assemblies (12).
Illustration 12 g00829590
Illustration 13 g00829584
Install cover (11) and screws (9).
Install knob (10).
Install cushions (7) and knobs (8).
Illustration 14 g00829529
Install cover (6) and screws (5).
Illustration 15 g00829528
Connect harness assembly (4).
Illustration 16 g00829522
Connect harness assembly (3).
Illustration 17 g00829520
Install bottom cover (2) and screws (1). End By:
Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".